Aomoproing SFF-8654 4i to SFF-8639 U.2 esata cable 50cm
Connects a U.2 SFF-8639 device to a SlimSAS SFF-8654 4i controller at 24 Gbps over 50 cm
Cable Length 0.5m
- 0.5m$19.99
- 100 cm$20.99
- 24 Gb/s SAS throughput moves large datasets fast
- 50 cm cable length keeps internal routing tidy
- PCIe 4.0 support enables high-bandwidth controller links
- SFF-8654 4i to SFF-8639 U.2 connects SlimSAS to U.2 devices
- 8 GT/s per channel delivers low-latency signal integrity
Connection Interface
This cable bridges a SlimSAS SFF-8654 4i host port to a U.2 SFF-8639 drive connector. It carries PCIe 4.0 and SAS signals at up to 24 Gbps per channel over a 50 cm length. The assembly is designed for internal chassis routing between a controller and a compatible drive backplane.
Target Builder
It suits integrators wiring a modern SlimSAS 4i controller to U.2 bays in servers or workstations. It will not serve builds that rely on legacy wide-port SAS plugs, standard 7-pin SATA headers, or external eSATA brackets. Buyers needing a different host-side pinout or a longer reach must source an alternative cable.
Decisive Specification
The host connector is a 4-lane SlimSAS SFF-8654 4i plug; the drive end is an SFF-8639 U.2 receptacle. Verify that both the controller and the drive bay present exactly these interfaces before ordering, as the cable does not adapt to other connector families.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Questions about this item
What controller connector does the SFF-8654 4i end plug into?
The cable terminates in a SlimSAS SFF-8654 4i plug that mates with a matching controller port.
How do I connect the U.2 SFF-8639 end to the drive?
Align the SFF-8639 connector with the U.2 port on the drive and press straight in until the latch clicks.
When should I replace this 50cm cable?
Replace it if the latch fails to hold, the connector pins are bent, or signal errors appear during 24Gbps transfers.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III






