ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ITX board with 8-core i5-12450H, 4×2.5GbE LAN, dual DDR5 to 32 GB, six SATA and two M.2 NVMe slots
The AOSU motherboard measures 17.0 cm square and integrates an Intel i5-12450H processor with 8 cores and 12 threads. It targets builders assembling a low-power NAS, firewall or router appliance that needs multiple high-speed network ports and dense storage in a small chassis.
The supplier states every unit is tested with a radiator before shipping and that a good radiator is mandatory for operation. The board also requires both the 24-pin and 4-pin ATX 12V connectors to be populated simultaneously to power on, indicating a platform designed for continuous rather than burst workloads.
Two DDR5 slots accept non-ECC memory up to 32 GB at 4800, 5200 or 5600 MHz. Six SATA3.0 ports and two M.2 2280 slots provide primary storage, though the second M.2 slot shares its PCIe 3.0 x1 signal with the single PCIe x1 slot so they cannot be used together. Two SFF-8643 sockets allow further expansion to four additional NVMe or four SATA drives.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The board uses an Intel i5-12450H processor with 8 cores, 12 threads and a 4.4 GHz maximum turbo. The supplier notes every unit is tested with a radiator before shipping and that a good radiator must be used during operation.
A 24-pin ATX connector and a 4-pin ATX 12V connector must both be attached at the same time for the board to power on.
The PCIe x1 slot shares its signal with the M.2-2 NVMe slot (PCIe 3.0 x1), so both cannot be used simultaneously.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?