Banner K30APT2XBF2Q Touch Pickup Indicator 804034 electrician tool

Touch Pickup Indicator for 12-30 V DC systems

The Banner K30APT2XBF2Q is a capacitive touch sensor with a single blue LED indicator designed for pick-to-light and machine-tending applications. It operates on 12-30 V dc supply voltage and uses a PNP normally open output with a maximum output response time of 150 ms. The polycarbonate housing carries IP67 and IP69K environmental ratings plus NEMA and UL 4X, 13 type ratings for wash-down environments.

Check mounting thread and connector type

Verify that the M22 x 1.5 mounting thread matches your panel cut-out and that a 4-pin M12 Euro quick-disconnect cable is available for wiring. The sensor requires a PNP input signal and provides individual color control on one wire per colour. Confirm the operating temperature range of -40 to 50 °C and 90 % non-condensing humidity at 50 °C suit the installation location.

Low current draw and sealed housing

Typical current consumption is 55 mA per colour with a blue LED output of 1.0 lumen at 470 nm wavelength. The sealed polycarbonate dome window has no moving parts, so acoustic noise is negligible in normal use. Power dissipation remains low across the full supply voltage range, and the unit is rated for storage temperatures from -40 to 70 °C without performance loss.