Barrow Mods LRC 2.0 Aurora 3-Pin RGB Extension Cable 80 CM
Extends 3-pin RGB lighting connections by 80 cm for LRC 2.0 Aurora components
- Cable length2.6 ft (0.79 m)
- Extends LRC 2.0 Aurora lighting reach by 80 cm
- 3-pin 2510 connector fits Barrow LRC 2.0 Aurora devices
- 6 ft cable length gives flexible routing options
- Black sleeve matches standard PC build aesthetics
- Designed specifically for Barrow LRC 2.0 Aurora ecosystem
What this cable connects
The Barrow Mods LRC 2.0 Aurora extension cable adds 80 cm of reach to any LRC 2.0 lighting component that uses a 2510 3-pin fan connector. It is built for PC builders who need to route Aurora RGB strips or blocks farther from the controller than the stock leads allow.
Connector standard that must match
The cable terminates in a 2510 3-pin fan interface, so it only works with LRC 2.0 Aurora devices that accept that exact plug. It will not fit 4-pin PWM headers, proprietary 5 V ARGB sockets, or any non-Barrow lighting ecosystem.
Routing and common pitfalls
The black sleeve is flexible enough for standard case channels, but sharp bends near the connector can strain the tiny 2510 pins. Leave a gentle curve at each end and verify the latch clicks fully; a loose seat causes flicker or total loss of signal.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 2.6 ft (0.79 m) |
Questions about this item
What does the 80 cm length mean once the cable is routed inside a real case?
The 80 cm extension adds roughly 2.6 ft of reach so LRC 2.0 Aurora lighting strips can span larger chassis or route behind motherboard trays without tension.
What does the 2510 3-pin interface cap in practice?
The 2510 3-pin connector carries the LRC 2.0 Aurora signal and power, limiting the cable to Barrow LRC 2.0 Aurora devices that use this specific 3-pin fan header.
What clearance or mounting points does the cable need to fit?
The black 80 cm cable requires only a free 3-pin fan header on an LRC 2.0 Aurora controller and enough slack to route the 2.6 ft length to the lighting product.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs SATA18BK90 SATA cable 18 inch 90 to 180 degree latching
- 18 in (45.7 cm)
- Cable Connectors
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
EN-Labs SATA18UVGN-3PACK 3-pack 18 inch SATA cable
- 1.5 ft (0.46 m)
- Cable Kits





