BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
Three 18-inch blue SATA III cables with locking latches connect 2.5" SSDs, 3.5" HDDs and optical drives at up to 6 Gbps
- Rated speed6,000 MB/s
- Connector detailsSata
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeSATA
- Product colorBlue
- Secure connections with locking latch on each end
- Fast data transfer up to 6Gbps with SATA 3.0
- Backward compatible with SATA I and II drives
- 18 inch length for easier cable routing
- Three cables included for spare or replacement use
Three-Pack SATA III Data Cables
This three-pack supplies 18-inch SATA III cables with locking latches for connecting internal hard drives, SSDs or optical drives to a motherboard or host controller. Each cable uses copper conductors and supports the 6 Gbps SATA 3.0 specification while remaining backward compatible with SATA I and II devices. The blue low-profile jacket helps routing inside tight cases.
Suits builders adding multiple drives.
The cables suit anyone installing several 2.5 or 3.5-inch drives, a DVD writer or a RAID controller card who wants spare or replacement data links in one purchase. They carry data only, so builders who need combined power and data in a single cable must look elsewhere. The 18-inch length may also fall short in full-tower chassis where drives sit far from the motherboard.
Plug-in installation with locking latch
Installation is plug-and-play with no software required; the L-type keyed receptacle and stainless-steel locking clip click onto each SATA port to prevent accidental disconnection. The main issue is forgetting that the cable supplies no power, so a separate SATA power lead from the PSU is still needed for every drive. Ensure the latch fully engages or the link may drop to a lower speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BENFEI |
| Model name | 000183black |
| Product type | SATA |
| Product color | Blue |
| Performance | |
| Rated speed | 6,000 MB/s |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What type of drive connectors must my motherboard or host controller have for these cables to fit?
Your motherboard or host controller needs standard 7-pin SATA data ports; the cables are male-to-male and lock into those ports.
Will these cables work with older SATA I or SATA II drives I plan to keep?
Yes, the cables are backward compatible with SATA I and SATA II devices, though transfer speed will be limited by the drive's own rating.
How can I confirm the cables are running at the full 6 Gbps after installation?
Check the negotiated link speed in your BIOS or operating-system storage utility; it should report 6 Gbps when both the drive and controller support SATA III.
More in SATA & eSATA Drive Cables
Similar items
LUOM US217 SATA III cable 18 in 3-pack straight locking latch
- 1 in (2.54 cm)
- SATA III
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
EN-Labs 5PKSATAIII60CMBK 5-pack SATA 3.0 6Gbps locking cable 24" black
- 2 ft (0.61 m)
- SATA Data Cable
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
Sabrent CB-SFK3 SATA III 6 Gbps locking data cable 3-pack 20 in
- Optical
- SATA





