STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adapts a Dell Inspiron mini 6-pin ATX header to a standard SATA 15-pin power connector for drives or coolers
This two-pack provides a direct link between the mini 6-pin ATX header on select Dell Inspiron motherboards and any standard 15-pin SATA device. Each cable measures 38 cm including connectors and uses 18 AWG conductors wrapped in braided sleeving. The male-to-male design fits liquid CPU coolers, mechanical hard drives and SATA SSDs without additional adapters. Self-adhesive tape is included for basic cable management.
The connector labelled mini 6-pin is not interchangeable with a standard 6-pin PCIe or ATX plug; forcing it will damage the motherboard. Compatibility is limited to the Inspiron models 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668 and explicitly excludes OptiPlex 3020 3046 5040 7020 7040 9020 SFF T1700 and Vostro series. Builders who need a second card or a different Dell chassis must source the correct mini 8-pin or standard 6-pin variant instead.
Each 38 cm lead supplies one SATA power connection, so the pair comfortably handles a boot drive plus a secondary SSD or a liquid-cooler pump and one drive. The 18 AWG gauge supports typical SATA device currents, but the fixed mini 6-pin header means the total draw cannot exceed what that single motherboard port is rated to deliver. Systems requiring more than two SATA power drops or a longer reach will need a different power distribution solution.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | BUCIER |
| Model name | BX0019-1175X |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Iron |
This pack contains two 38 cm cables, each with a mini 6‑pin ATX connector for the motherboard and a 15‑pin SATA connector for the drive.
The 18 AWG conductors with braided sleeves are rated for standard SATA device currents and keep the 38 cm run tidy without voltage drop concerns.
No — it is a Dell‑specific mini 6‑pin ATX port; a standard 6‑pin PCIe connector will not fit and must not be forced.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?