STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SAS controller to four SATA drives using a 3.3 ft SFF-8087 breakout cable with 90-degree right-angle connectors for tight spaces
This BUCIER cable converts one internal Mini SAS SFF-8087 36-pin male connector into four SATA 7-pin female right-angle connectors. The 3.3 ft length uses 30 AWG copper conductors rated for 6 Gb/s per drive and both ends feature locking latches. It is designed to link a SAS RAID controller or HBA directly to up to four SATA hard drives or SSDs.
Suits anyone wiring a SAS HBA or RAID card to individual SATA drives inside a chassis where the 90-degree SATA plugs ease routing. Not for installations that require straight SATA connectors, longer reach than 3.3 ft, or a Mini SAS SFF-8087 female port on the host side. Also unsuitable if the target device expects a Mini SAS receptacle rather than four separate SATA ports.
The cable only works when the controller or motherboard presents an internal SFF-8087 36-pin male port; plugging the Mini SAS end into a backplane or any other connector type will not function. Verify that single port type before purchase.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-0015 |
| Product type | Mini-SAS Cables |
| Product color | Black+blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
The package includes one 3.3FT Mini SAS SFF-8087 male to four SATA 7-pin female right-angle cables. The SFF-8087 end plugs into a SAS HBA or RAID controller; each SATA end connects directly to a drive or backplane. No extra adapters are required for the four SATA targets.
The SFF-8087 host connector supports 12 Gbps aggregate bandwidth, while each of the four SATA lanes runs at 6 Gbps. Any 6 Gbps SATA SSD or HDD will operate at its rated speed; the 12 Gbps host capability simply provides headroom for four simultaneous 6 Gbps streams.
Each SATA plug angles 90 degrees forward from the cable, allowing the connector to sit flat against a drive or backplane. This reduces strain in tight drive cages and keeps the 30 AWG cable routed cleanly alongside the chassis without sharp bends.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?