STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SFF-8087 host port to four SFF-8482 drives with integrated SATA power over a 3.3 ft copper cable
The BUCIER Mini-SAS SFF-8087 to 4×SFF-8482 breakout cable connects a single 36-pin SFF-8087 host port on a RAID controller or motherboard to four SFF-8482 targets. Each target includes a SATA 7-pin data connector and a 15-pin power adapter. The cable is 3.3 ft long and rated for 6 gigabits per second.
Every SFF-8482 branch carries its own SATA 15-pin power connector, so drives receive both data and power from the same assembly. This removes the need for separate power cables from the PSU to each drive. The 30 AWG conductors keep the bundle thin and flexible for routing inside tight chassis.
This breakout suits builders attaching up to four SAS or SATA hard drives or SSDs directly to an internal SFF-8087 host port. It will not work with SAS drives connected through a backplane using the SFF-8087 connector, nor with configurations that require a middle SAS pin on the target side.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-009 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
The cable uses 30 AWG copper conductors and SFF-8482 connectors with integrated SATA 15-pin power adapters; no user-serviceable parts are specified, so plan to replace the entire assembly if a connector fails.
Each SFF-8482 leg is rated for 6 Gbps, so the per-drive SAS 6 Gbps ceiling is the first bottleneck under sustained transfer.
The passive copper cable adds no active cooling or noise; only the drives and controller generate heat, while the 30 AWG wires carry the 6 Gbps signals without extra power draw.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?