We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bykski 200mm 12 LED RBW strip with JST-PH connector

Bykski

Bykski B-VCLT-200X12RBW 5V RBW LED strip 200mm 12 LED diy cooling

SKU CH-JW21-8SK60 MPN B-VCLT-200X12RBW

Addressable 5 V LED strip with 12 lights on a 200 mm board for water-block illumination

  • Product typeCPU Block
  • Addressable RGB lighting with 12 LEDs for vivid effects
  • 5V JST-PH connector enables direct motherboard header control
  • 200mm strip length suits compact water-block channels
  • Includes two mounting screws for secure installation
  • Bykski Aura System compatibility allows synchronised colour modes

Bykski 5V RBW LED strip for water blocks

The Bykski B-VCLT-200X12RBW is a 5 volt addressable RGB strip designed to fit inside compatible water blocks. It targets builders adding lighting to custom liquid-cooling loops. The strip connects via a JST-PH connector and requires a separate controller or B-ADPC-RBW adapter for colour and mode control. It is sold new with two mounting screws included.

Sustained lighting behaviour in a loop

The strip draws power from the 5V line and maintains consistent illumination as long as the controller supplies stable voltage. Lighting effects depend entirely on the external controller firmware and chosen mode. Without an active controller the LEDs remain off, so the strip does not produce any default pattern on its own. Thermal output from the LEDs is negligible during continuous operation.

Thermals noise and power draw

The LED strip generates minimal heat and adds no audible noise to the cooling system. Power consumption is limited to the 5V rail and the 12 LEDs on the 200mm length. It does not require a dedicated power supply beyond the motherboard or controller 5V header. The product carries a warning that the manufacturer accepts no responsibility for damage arising from its use.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 55% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeCPU Block

Questions about this item

Does the 5 V RBW strip add noticeable heat or draw enough power to affect a loop running all day?

It runs on the 5 V line with only 12 LEDs over 200 mm, so the extra heat and power draw inside the loop are negligible.

What do I already need to plug the JST-PH connector into a motherboard or controller?

You need a 5 V addressable-RGB header or a Bykski B-ADPC-RBW adapter; the strip cannot connect directly to a 12 V header.

Will this 200 mm JST-PH strip fit the older Bykski water block I already own?

It matches Bykski blocks that use the same 200 mm JST-PH RBW layout; check your block’s LED channel length and connector before installing.

More in Heatsinks & Water Blocks

Similar items