BYTECC HDMI Splitter 1 in 2 Out 4K@60Hz 18Gbps HDMI 2.0 HDR10 HDCP 2.2 EDID Management

Splitter for dual 4K displays

This HDMI 2.0 splitter takes one source and sends an identical signal to two screens at up to 4K@60Hz with 18Gbps bandwidth. It supports HDR10 and HDCP 2.2 for protected 4K content from consoles, streaming boxes or Blu-ray players. EDID management helps negotiate handshakes when the connected displays have different native resolutions. The unit requires the included 5V power adapter for operation.

Sustained 4K signal integrity

The iron-shell enclosure dissipates heat during continuous 4K@60Hz transmission without throttling or signal drop-out. Automatic splitter mode maintains a stable 18Gbps link to both outputs simultaneously, avoiding the flicker that can appear on passive adapters under long sessions. EDID reset button forces a fresh handshake if one display loses sync after extended use. Compatible audio formats including DTS:X, Dolby TrueHD and PCM up to 192kHz pass through without degradation.

Replaces basic 1080p splitters

Upgrading from a 1080p-only splitter is worthwhile when the source and both displays support 4K@60Hz HDR10, as the 18Gbps pipe and HDCP 2.2 compliance preserve full quality. It does not expand a desktop across two monitors — only mirroring is possible — so buyers needing independent screens should not use this device. Soundbars limited to ARC or eARC ports will not receive audio from the second HDMI output. The 60cm maximum cable length also limits placement flexibility compared to longer-run solutions.