We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short white power cord with a straight C14 plug and notched C15 connector

Cable Leader

Cable Leader 1 ft IEC C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V White

SKU CH-8VBG-KC5G7

A 1 ft white IEC C14 to C15 jumper with 14 AWG SJT cable rated 15A at 250V for high-temperature rack equipment

  • Connector count2
  • Conductor gauge14 AWG
  • Product colorWhite
  • Overall length11 in - 15 in

Length 1ft

Color White

  • Powers high-temperature gear via notched C15 connector for C16 inlets
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V withstands hot rack environments
  • White jacket enables colour-coded circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Rack PDU jumper for hot gear

This one-foot IEC 60320 C14-to-C15 cord connects a rack PDU or C13/C14 outlet to network switches and other equipment that uses a high-temperature C16 inlet. The notched C15 connector is built for the higher heat those devices produce. It is a direct replacement or expansion link for standard server-rack power distribution.

Heavy-duty 14 AWG build and white jacket

The cord uses three-conductor copper at 14 AWG with an SJT jacket rated to 105C and 300V, supporting 15A at 250V. The white colour lets you colour-code circuits inside the rack for faster identification. UL Listed and CSA certified (file E210037) plus RoHS compliant confirm the safety and materials standards.

Check inlet and outlet types before ordering

Verify that your source outlet is a C13 or C14 and that the device inlet is a C16; the notched C15 will not mate with a standard C14 inlet. Confirm the equipment draw does not exceed 15A and that the 11-to-15-inch length reaches between your PDU and the unit. This cord is not for gear that uses a regular C14 inlet or for circuits requiring a heavier gauge.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 60% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGENERIC
Product colorWhite
Ports & slots
Connector count2
Size & build
Overall length11 in - 15 in
Conductor gauge14 AWG

Other versions of this model

5 more in the same range

Questions about this item

What does the IEC 60320 C14-to-C15 connection support?

The C14 plug fits a rack PDU or C13/C14 outlet, while the notched C15 connector powers equipment with a high-temperature C16 inlet such as network switches.

What clearance and outlet type does this cord need to mount?

It requires a standard C13/C14 PDU outlet and a C16 inlet on the device; the 11-to-15-inch white SJT jacket fits typical 1U rack spacing.

How is the cord installed and what step is often missed?

Seat the C14 fully into the PDU until it clicks, then align the notch on the C15 with the C16 inlet keyway and push until it locks; the notch orientation is the step most often overlooked.

More in Jumper & Adapter Power Cords

Similar items