We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 25 ft IEC C14 male to C13 female power extension cord with SJT jacket

Cable Leader

Cable Leader 25ft IEC C14 to C13 Power Extension Cord 16 AWG 13A 250V Black

SKU CH-FVWB-J1DF6

A 25 ft black extension cord with a male C14 plug and female C13 socket, 16 AWG rated for 13 A at 250 V, UL Listed and CSA certified for rack PDU or UPS connections

  • Connector genderMale to Female
  • Conductor gauge16 AWG
  • Product typeExtension Cable
  • Product colorBlack
  • Overall length25 ft (7.62 m)
  • Extends C14/C13 power reach by 25 ft without adapters
  • 16 AWG copper handles 13A at 250V for server loads
  • UL Listed and CSA certified (file E210037) for safety
  • Black SJT jacket simplifies rack circuit identification
  • IEC 60320 connectors fit standard PDU, UPS and server gear

25 ft C14 to C13 extension

This 25 ft power extension cord adds reach between a rack PDU, UPS or server and an existing C13 cable. The male C14 plug connects to the power source while the female C13 socket accepts your current cord, eliminating the need for an adapter. It is built for server, rack and data-centre loads using 16 AWG three-conductor copper with an SJT jacket rated 105C and 300V.

Plug-in installation and gauge choice

Installation is a simple plug-in: the C14 male end seats in the PDU or UPS outlet and the C13 female end receives your device cord. The black SJT jacket helps colour-code circuits and phases at a glance. Choosing the wrong gauge is the common error; 18 AWG handles up to 10A, 16 AWG up to 13A, 14 AWG up to 15A and 12 AWG up to 20A, so verify your equipment draw before buying.

Sustained 13A / 250V operation

Under continuous load the cord delivers its rated 13A at 250V without exceeding the 105C temperature rating of the SJT insulation. UL Listed and CSA certified (file E210037) with RoHS compliance, it is designed for steady server and networking duty rather than short bursts. Buyers who need more than 13A or a higher temperature margin should select a heavier gauge.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 67% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeExtension Cable
Product colorBlack
Ports & slots
Connector genderMale to Female
Size & build
Overall length25 ft (7.62 m)
Conductor gauge16 AWG

Questions about this item

How can I confirm the extension cord is delivering power correctly after connecting it between my PDU and server?

Plug the male C14 end into the PDU or UPS outlet, attach your server cord to the female C13 socket, then verify the server powers on and runs without interruption.

What is included in the package and are any additional connectors or adapters required for a standard rack setup?

The box contains the 25 ft black SJT-jacketed extension cord with a male IEC 60320 C14 plug and a female C13 socket; no extra adapters are needed for typical PDU-to-server connections.

Which gauge should I choose if my equipment draws up to 13 amps at 250 volts?

Select the 16 AWG version — it is rated for 13A/250V and suited for computers and standard rack gear, whereas 18 AWG only handles 10A and 14 AWG is for 15A loads.

More in PC & Server Extension Cords

Similar items