We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CableCreation

CableCreation SFF-8644 to 4 SATA 7 Pin Cable 3.3 FT

SKU CH-R0X2-JERZX

Connects an SFF-8644 HBA card to four SATA drives with a 3.3 FT cable supporting 6 GB/s data rates

  • Connects HBA cards to four SATA drives
  • Supports data rates up to 6 GB/s
  • SAS 2.1 compliant for reliable server use
  • Locking latches and mesh sheath improve airflow
  • 3 ft length suits typical chassis layouts

SFF-8644 to four SATA 3.3 ft cable

This new CableCreation cable connects an SFF-8644 HD Mini SAS 36-pin host port on an HBA card to four SATA 7-pin drives such as SSDs or HDDs. It supports data rates up to 6 GB/s and complies with SAS 2.1. A woven mesh sheath and locking connector latches reduce airflow restriction inside the case.

Suits builders adding multiple SATA drives

Not for installations that require a different host connector or more than four SATA breakout connections. Buyers needing longer runs or alternative fan-out counts should look at other cable configurations.

36-pin SFF-8644 host connector

The 36-pin SFF-8644 interface and SAS 2.1 rating determine whether the cable matches the host controller and the desired 6 GB/s link speed. Verify the HBA port type before purchase.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 78% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What maximum data rate does the SFF-8644 to 4 SATA cable support under sustained use?

The cable is rated for up to 6 GB/s and complies with SAS 2.1, so sustained throughput is limited by that specification.

How does the woven mesh sheath affect heat and airflow when the cable runs all day in a server chassis?

The woven mesh sheath is designed to minimise impact on airflow, helping maintain efficient cooling during continuous 24/7 operation.

Which host-side connector must the system already have for this cable to plug in?

The host end requires an SFF-8644 HD Mini SAS 36-pin port, typically found on an HBA or RAID controller card.

More in SATA & eSATA Drive Cables

Similar items