We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6a snagless UTP patch cable, ten feet long with RJ45 plugs on both ends

Cables To Go

Cables To Go 50769 Cat6a Snagless UTP 10 ft White network ethernet cable

SKU CH-7CY1-SZPCJ MPN 50769

A 10 ft Cat6a UTP patch cable with snagless RJ-45 connectors, tested to ANSI/TIA 568 C.2 for 10 Gigabit transmission up to 100 metres

  • Cable category6A
  • First connector1 x RJ-45 Male
  • Second connector1 x RJ-45 Male
  • ShieldingUnshielded
  • Product typeNetwork Ethernet Cable
  • Overall length10 ft (3.05 m)
  • Supports 10 Gigabit data transmission over copper
  • Snagless hood protects connectors in dense switch ports
  • Tested to ANSI/TIA 568 C.2 Cat6a channel requirements
  • Unshielded twisted-pair design reduces alien crosstalk
  • 10 ft length with individual label for easy identification

10 ft Cat6a UTP patch cable

This 10 ft white Cat6a unshielded patch cable carries RJ-45 male connectors on both ends and is built for 10GBase-T equipment such as switches, routers and patch panels. It supports 10 Gigabit data transmission over four-pair copper runs up to 100 meters.

Upgrade from Cat6 limited runs

Current Cat6 cabling may only support 10 Gigabit Ethernet over shorter distances, so this Cat6a cable is the direct replacement when full 100 metre reach is required. The jump is worth it for new 10GBase-T deployments or when alien crosstalk margins must meet ANSI/TIA 568 C.2 channel specifications.

Snagless hood eases dense installs

The snagless boot protects the latch during frequent moves in crowded switch ports, and each cable carries an individual length label for quick identification. Take care not to exceed the 100 metre channel limit or bend the cable tighter than the manufacturer allows, as either can degrade 10G performance.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 9,945 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameC2G
Model name50769
Product typeNetwork Ethernet Cable
Product colorWhite
Connectivity
Cable category6A
Ports & slots
First connector1 x RJ-45 Male
Second connector1 x RJ-45 Male
Size & build
Overall length10 ft (3.05 m)
ShieldingUnshielded
Shipping weight0.14 kg
Package size152 × 127 × 25 mm

Questions about this item

What clearance does the snagless hood need around an RJ-45 port?

The snagless hood fits standard RJ-45 jacks on switches, routers and patch panels; allow enough room for the boot to sit flush without pressing against adjacent ports.

Which way round do the two RJ-45 male connectors go when linking a switch to a patch panel?

Both ends are identical RJ-45 male plugs; insert either end into the switch and the other into the patch panel — no crossover wiring is required.

When should this Cat6a cable be replaced if it stays in a permanent installation?

Replace it if the jacket shows cracks, the snagless hood splits, or certification testing shows the link no longer meets ANSI/TIA 568 C.2 Cat6a channel limits.

More in Ethernet & LAN Cables

Similar items