Canare L-3CFW Coaxial RF Cable 100' Black
Low-loss 75 Ohm coaxial cable with 94% shielding and solid copper conductor for professional video and audio runs
- Low signal loss for professional video with 75 Ohm impedance
- 94% shield coverage blocks electromagnetic interference in any environment
- Solid bare copper conductor and foam PE insulation ensure long-lasting durability
- Flexible PVC jacket protects internals for indoor and outdoor installations
- 100-foot length provides reach for studio or home theater setups
Professional 75 Ohm Coaxial Cable
The Canare L-3CFW is a 75 Ohm low-loss coaxial cable built for professional video and audio signal distribution. It uses a solid centre conductor with foam PE insulation and a dense braided shield to maintain signal integrity over long runs. The flexible PVC jacket protects the assembly for both indoor and outdoor installations. It is supplied in a 100 foot length.
Installers needing reliable HD-SDI runs
This cable suits broadcast engineers, studio technicians and home-theatre builders who require consistent 75 Ohm impedance for SD through HD-SDI formats. The 94% shield coverage rejects electromagnetic interference in electrically noisy environments. Buyers who need F-type connectors pre-terminated should look elsewhere, as this is bulk cable only. Installations requiring plenum-rated jackets must choose a different product.
Stable attenuation on extended pulls
The low-loss foam dielectric keeps attenuation stable during sustained high-frequency transmission such as continuous HD-SDI streaming. The bare copper conductor and 94% braid maintain shielding effectiveness and impedance consistency across the full 100 foot span. The flexible jacket resists kinking when pulled through conduit, preserving the electrical geometry under mechanical stress. Signal integrity holds without the degradation seen in thinner cables on long hauls.
How it compares
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
- Price $76.99
- Pricier than about 85% of the 201 comparable items (median $20.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What connectors are required to terminate this 75 Ohm coaxial cable for HD-SDI distribution?
The cable uses standard F-Type connectors matching its 75 Ohm impedance. You need F-Type compression or crimp plugs rated for RG-6 size cable and a compatible compression or crimp tool to install them.
Can this 75 Ohm cable replace older 75 Ohm coax in an existing SDI patch bay without impedance mismatch?
Yes, the 75 Ohm impedance is precisely maintained throughout the cable, so it matches legacy 75 Ohm SDI infrastructure and will not introduce impedance mismatch in a patch bay.
How can I verify the 94% shield coverage is effective after installing the cable?
Connect a known clean SDI source and monitor the signal on a waveform monitor or SDI analyser; a stable eye pattern with no jitter or sparkles confirms the shielding is rejecting interference as intended.
More in Coaxial RF & Antenna Cables
Similar items
Logico COX3503 RG6 Quad Shield Coaxial RF Cable 1000ft White
- Coaxial Cable
- White





