STARTECH USB312SAT3CB USB 3.1 Gen 2 to SATA converter cable 2.5
- 2.5 in (6.35 cm)
- USB to SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 24-pin USB 3.1 Type-C male-to-female breakout board pair on FR-4 with 2.54 mm pitch headers for cable testing and DIY prototyping
This pair of Cermant boards converts a USB 3.1 Type-C male plug into a female socket with a 24-pin header for probing. Engineers and hobbyists use them to access every line during cable validation, prototype bring-up or DIY electronics work.
The FR-4 glass-fibre PCB with green-oil spray-tin finish maintains the USB 3.1 10 Gbps rate across the 20 × 36 mm board area. Vertical 2.54 mm pitch pins rated at 3 A carry power and data without the signal degradation that occurs on flying-lead adapters during long test sessions.
Verify that your test fixture accepts 2.54 mm pin pitch and 1.0 mm aperture holes before ordering. The 0.8 mm board thickness and 42 × 36 mm overall footprint must clear surrounding components, and the vertical pin direction requires top-side access on the target PCB.
Measured against everything we stock in USB Adapter Cables & Dongles, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Cermant |
| Part number | Celent CL574 |
| Product type | USB Type C |
| Product color | Green |
| Adapter type | USB Type C |
| Ports & slots | |
| First connector | USB Type C |
| Second connector | USB Type C |
The board is a passive breakout with no active components, so it adds no measurable power draw or heat while connected.
You need standard 2.54 mm jumper wires or a matching header connector to access the exposed pins.
Yes, the connector is fully backward-compatible and will operate at USB 2.0 speeds with legacy cables and ports.
More in USB Adapter Cables & Dongles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?