We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical carbide cutting tool with two flutes and square end

Cleveland

Cleveland C60484 2-Flute Carbide Square Single-End HP End Mill for Alum CTD statue

SKU CH-RM2V-AXYY4

A 0.3125 in diameter carbide square end mill with a 0.4375 in length of cut for aluminium milling

  • Product typeCutting Tools
  • 3125 in milling diameter for precise aluminium cuts
  • Two-flute carbide design clears chips efficiently in soft metals
  • 4375 in length of cut handles shallow pockets
  • 5/16 in shank fits standard ER collets and holders
  • Uncoated carbide resists built-up edge on aluminium alloys

Cleveland C60484 End Mill for Aluminium

The Cleveland C60484 is a 2-flute carbide square end mill designed for high-performance machining of aluminium. Its single-end configuration and uncoated surface suit general-purpose milling tasks in a workshop or light-industrial setting.

Uncoated Carbide Construction

The uncoated carbide substrate provides hardness and wear resistance when cutting aluminium alloys. A straight shank design ensures secure holding in standard tool holders without coolant-through requirements.

0.3125 in Milling Diameter

The cutting diameter of 0.3125 in and length of cut of 0.4375 in define the material removal capability per pass. Buyers needing a larger diameter or longer reach for deep cavities should select a different tool.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 76% of the 1,271 comparable items (median $40.99).

Specifications

Product
Brand nameCLEVELAND
Product typeCutting Tools

Questions about this item

How is the 5/16 in shank end mill installed in a collet, and what step is often missed?

Insert the .3125 in shank fully into a matching collet, tighten the drawbar to the machine’s torque spec, and verify run-out before cutting — skipping the run-out check is the common error.

What maintenance will the uncoated carbide cutter need later?

The uncoated carbide flutes will dull with use; plan to resharpen or replace the tool once edge wear reduces cut quality in aluminium.

What limit appears first during sustained milling with the 0.4375 in length of cut?

Heat buildup in the uncoated carbide and chip evacuation in the two-flute design become the limiting factors during prolonged cuts.

More in Yard Ornaments & Garden Statues

Similar items