CoolGear MV1S HD-15 to S-Video/Composite Gender Changer
Converts HD-15 video to S-Video or composite with 1920x1200 resolution and USB power
- Product colorBlack
- Plug-and-play setup with no drivers required
- USB-powered operation removes need for external adapter
- Maximum supported resolution 1920 x 1200
- Simultaneous output on PC monitor and TV screen
- 32-bit true colour with NTSC, PAL and SECAM support
CoolGear MV1S HD-15 Converter
The CoolGear MV1S converts HD-15 video output from a laptop or desktop into standard S-Video or Composite signals for a TV or HDTV. It draws power from a USB port so no separate adapter is needed. The unit works instantly without driver installation. It supports NTSC, PAL and SECAM television standards.
Resolution headroom and limits
Maximum supported resolution is 1920x1200 with 32-bit true colour quality. Scan-rate modes include 100Hz, 85Hz, 75Hz and 60Hz. The converter cannot exceed that resolution or refresh range. Buyers who need higher pixel counts or different scan rates will find the device stops at these limits.
Bundled features and what they change
USB power removes the need for an external mains adapter, simplifying portable use. On-screen-display controls give direct adjustment of sharpness, scaling, positioning and a 4x zoom function. Simultaneous output lets the PC monitor and TV show the same image at the same time. Composite, S-Video and analog RGB SCART outputs are all available from the single box.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 90% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Coolgear |
| Model name | MV1S |
| Product color | Black |
Questions about this item
Will the MV1S work with an older graphics card that only outputs 60 Hz or 75 Hz VGA signals?
Yes, the converter supports scan rates of 60 Hz, 75 Hz, 85 Hz and 100 Hz, so it handles legacy VGA timings without extra configuration.
How can I confirm the MV1S is converting the signal correctly once connected?
The on-screen display appears on the TV for adjusting scaling, positioning and sharpness, and simultaneous output lets you verify the picture on both the monitor and the TV at the same time.
Does the MV1S include the S-Video and composite cables, or must I buy them separately?
The box contains the converter with its attached HD-15 pigtail and a USB power cable; S-Video, composite or SCART cables for the TV side are not included and must be purchased separately.
More in Other Adapters & Couplers
Similar items
Sabrent DA-CA2H USB-C/A to Dual HDMI Adapter
- Black
- 2.94 in x2.4 in x0.…
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard GD9805A SFF-8654 8i PCIe 4.0 to U.3 Dual Port with +12V Hot Swap Power Controller
- SlimSAS 8i to U.3 D…
- Black
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
Innocard GD0804A PCIe Gen4 SlimSAS 4i U.2 Adapter with Hot Plug Power protection
- PCIe Gen4





