Innocard GD9805A SFF-8654 8i PCIe 4.0 to U.3 Dual Port with +12V Hot Swap Power Controller
Converts SlimSAS 8i to dual U.3 ports with 12V hot-swap power controllers and eFuse protection for server and HBA applications
- Adapter typeSlimSAS 8i to U.3 Daul port Adapter
- Product colorBlack
- Converts U.3 dual ports to SlimSAS 8i for PCIe 4.0 connectivity
- Built-in 12V hot-plug power with 6.5A current limit and eFuse protection
- Compliant with NVM Express 1.4 and PCIe 4.0 specifications
- LED indicators show power-ready and active status per port
- Supports Broadcom 95xx Tri-Mode adapters with BP_TYPE and CPRSNT signal handling
Adapter Function & Target Use
The Innocard GD9805A connects a SlimSAS 8i host interface to two U.3 NVMe drive bays. It is built for server and HBA installations that require PCIe 4.0 connectivity with integrated hot-swap power management.
Suitable Builds & Limitations
This adapter suits administrators adding U.3 storage to Broadcom 95xx tri-mode controllers using the SlimSAS 8i link. It does not suit systems lacking a compatible SlimSAS 8i port or builds that require single-port U.2 connectivity without the integrated 12 V eFuse power circuitry.
Key Deciding Specification
The adapter provides dual U.3 SFF-8639 ports with a programmable 6.5 A current limit and back-to-back FET operation for each 12 V hot-plug circuit. This specific power-controller design determines whether the card can safely support the target SSDs during insertion and removal.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 90% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Innocard |
| Model name | GD9805A |
| Product color | Black |
| Adapter type | SlimSAS 8i to U.3 Daul port Adapter |
Questions about this item
What does the PCIe 4.0 rating mean once this adapter is installed in a server?
The adapter passes PCIe 4.0 signals from a SlimSAS 8i host connector to two U.3 drive bays, so each NVMe SSD can run at Gen 4 speeds without a protocol conversion layer.
Which SlimSAS standard governs the 8i connector pin-out on this board?
The 8i connector follows SFF-9402 Rev 1.1 pin-out, matching Broadcom 95xx Tri-Mode RAID and HBA adapters for direct cabling.
What clearance and power connections are required to mount the card and run the U.3 hot-swap bays?
The board plugs into a standard PCIe slot; each U.3 port draws up to 6.5 A from the on-board 12 V eFuse controller, so no external power cables are needed.
More in Other Adapters & Couplers
Similar items
Sabrent DA-CA2H USB-C/A to Dual HDMI Adapter
- Black
- 2.94 in x2.4 in x0.…
Intel E10G42BTDA Ethernet Svr Adapter X520-DA2
- Black
- Intel X520-DA2 Dual…
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard GD0804A PCIe Gen4 SlimSAS 4i U.2 Adapter with Hot Plug Power protection
- PCIe Gen4





