XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-speed PCIe Gen5 NVMe 2.0 internal SSD with an active air cooler, delivering up to 12,400 MB/s read and 11,800 MB/s write
The Corsair MP700 PRO is a 1TB internal SSD built on an M.2 2280 form factor with a PCIe Gen5 x4 NVMe 2.0 interface. It includes an active air cooler attached to the drive. High-density 3D TLC NAND provides the storage media. The drive is designed for consumer workloads and supports Microsoft DirectStorage.
This drive suits builders with a motherboard that exposes a PCIe Gen5 x4 M.2 slot and wants the cooler pre-fitted. Systems limited to PCIe Gen3 or Gen4 M.2 slots will not reach the advertised sequential speeds. The active cooler requires adequate airflow inside the chassis. Laptops or small-form-factor boards without clearance for the cooler should consider a bare drive instead.
The headline specification is the maximum sequential read of up to 12,400 MBps. That figure determines whether the drive can saturate a Gen5 link for large-file transfers and DirectStorage gaming workloads. If the platform cannot deliver Gen5 bandwidth, the extra headroom goes unused.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Corsair |
| Product line | MP700 PRO |
| Part number | CSSD-F1000GBMP700PRO/RF2 |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 12,400 MB/s |
| Sequential write speed | Up to 11,800 MB/s |
| Storage | |
| NAND flash type | High-density 3D TLC NAND |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | High-speed Gen5 PCIe x4 NVMe 2.0 M.2 interface |
| Size & build | |
| Form factor | M.2 2280 |
It works in a PCIe 5.0 x4 M.2 slot and is backward compatible with PCIe Gen4, so a Gen4 slot will also run the drive.
The cooler is built onto the M.2 2280 module and the drive remains backward compatible with PCIe Gen4 boards.
Run a benchmark such as CrystalDiskMark; the drive should show up to 11,700 MB/s read and 9,600 MB/s write under that tool.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?