ENERMAX ESC001-BK M.2 2280 NVMe SSD Heatsink DIY Cooling
- Material: Aluminum,…
- SSD Heatsink
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A dimmable rigid LED strip for PC custom lighting with a wider beam and lower power draw
The DarkSide DS-0624 is a 7.75-inch rigid LED strip that emits blue light for PC case illumination. It uses Japanese-made IC modules in a Connect G2 design that lowers the LED height by 33 percent to 2 mm. The strip is built for enthusiasts who want a slim, modular lighting element in a custom loop or air-cooled build.
The G2 module cuts LED height by 33 percent compared to the earlier version while widening the beam by 33 percent and increasing the light-emitting surface 2.4 times. Power draw is lower than before. The jump is worth it when a thinner profile, broader spread and brighter output matter more than staying with the taller, narrower first-generation strips.
The strip uses DarkSide Connect micro-connectors so you choose the exact power cables your layout needs. Cables are sold separately, letting you swap connector types without replacing the strip. The rigid form factor means the strip must be mounted flat; do not bend or short it to avoid permanent damage.
Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Darkside |
| Model name | DS-0624 |
| Part number | DS-0624 |
| Product color | Blue |
The strip is 7.75" long and 2 mm tall, so allow at least that length and a few millimetres of vertical space; do not bend the rigid board.
Plug the modular CONNECT power cable straight into the micro-connector; forcing it sideways or shorting the pins will cause permanent damage.
Replace the cable if the connector feels loose, shows bent pins, or the strip flickers, because the cable is the only replaceable link in the chain.
More in Heatsinks & Water Blocks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?