DIXSG 2-Prong Figure-8 Power Cord 1.5m 18AWG 10A 125V

Replacement Figure-8 Cord for JBL PartyBox

This two-prong IEC C7 cable replaces the original mains lead on JBL PartyBox 100, 110, 200, 300, 310, 710, 1000 and On-The-Go speakers. It also fits JBL Cinema 510 and the Bar 2.0, 2.1, 5.0, 5.1 and 9.1 soundbar ranges. The 1.5 metre length gives a little extra reach behind furniture. Rated 10 A at 125 V with 18 AWG conductors, it meets the power needs of each listed model.

Buyers Needing a Direct Swap

Owners of the named JBL speakers and soundbars who have lost or damaged the factory cord can plug this in and resume use immediately. It also works with other non-polarised C7 devices such as some printers and TVs that accept a figure-8 connector. Buyers whose equipment requires a three-pin earthed plug or a higher voltage rating should look for a different cable type.

10 A 125 V Capacity With 1.5 m Reach

The 18 AWG conductors comfortably supply the 10 A maximum draw of the compatible JBL models at 125 V. The 1.5 metre run handles that load without significant voltage drop for typical indoor distances. Runs that exceed this length or installations needing a grounded connection will require a heavier or earthed alternative.