Dogfish Technology Shark 2.5 60G 60GB SATA internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 2.5" SATA internal SSD using 3D NAND with sequential speeds up to 550 MB/s read and 400 MB/s write
Capacity 1TB
The Dogfish Shark 1TB SATA SSD is a 2.5 inch internal solid state drive built for desktops and laptops. It uses 3D NAND flash and a SMI controller behind a SATA III 6Gb/s interface. The drive targets everyday computing, OS boot and bulk storage upgrades.
Under continuous operation the drive delivers up to 540MB/s sequential read and 500MB/s sequential write. Built‑in ECC, bad‑block management, garbage collection and TRIM keep write performance stable over long sessions. DevSleep lowers power draw during idle periods.
The SATA III link caps throughput at 6Gb/s, so real‑world speeds cannot exceed the 550MB/s read and 400MB/s write ceiling of the bus. The drive operates from 0°C to 70°C and survives storage from -45°C to 85°C at up to 95% humidity. MTBF is rated at 1,000,000 hours.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Shark |
| Product line | 500G msata |
| Model name | Shark MSATA 500G |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | 540 |
| Sequential write speed | 500 |
| Storage | |
| NAND flash type | 3D NAND |
| Controller chip | SMI |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 100 mm |
| Overall width | 69.9 mm |
| Product depth | 6.8 mm |
| Product weight | 100g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -45 °C to 85 °C |
| Operating humidity range | 0% ~ 95% |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The drive supports DevSleep ultra low power state to reduce consumption when idle.
A free 2.5" bay with SATA III 6Gb/s interface and 7 mm clearance for the 6.8 mm drive height.
Yes, the SATA III interface is backward compatible with SATA II ports, though sequential speeds will be limited to the older link.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?