Eaton Bussmann GDC-2A Glass Fuse 2A 250V AC 35A Interrupt 5 Pack

Circuit Protection for 250 V AC Circuits

The Eaton Bussmann GDC-2A is a cylindrical glass fuse rated at 2 A and 250 V AC with a 35 A interrupt rating. It suits low-current mains or control circuits where a time-delay characteristic prevents nuisance tripping during brief inrush currents. Each pack contains five fuses for replacement or spares.

35 A Interrupt Limit at Rated Voltage

The fuse will safely clear faults up to 35 A at 250 V AC; above that level it cannot guarantee interruption and the circuit must rely on upstream protection. It is a non-rejection type without a physical keying feature, so it fits standard 5 mm × 20 mm holders but offers no mechanical prevention against installing a higher-rated fuse. The glass body allows visual inspection of the element after a fault.

2 A Time-Delay Rating for Inrush Tolerance

The 2 A time-delay rating is the single figure that decides suitability: the fuse must carry the normal load current continuously yet withstand temporary surges such as transformer magnetising current or motor start-up. Circuits drawing more than 2 A continuously or requiring a fast-acting response for sensitive semiconductor protection will need a different fuse type.