We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PCB hub with eight 3-pin fan headers and a Molex power connector, adhesive backing visible

EN-Labs

EN-Labs 11-001-406D 8-port 3-pin fan hub internal power cable

SKU CH-F61P-1R71M

Expands one Molex header to eight 3-pin or 4-pin fans with a three-position 12 V, 7 V and off switch and adhesive mounting

  • Connector count9
  • Product type8 ports 3pin fan hub
  • Product colorBlack
  • DetailsSize: 45 mm x 33 mm x 15 mm( with adhesive) Fan Speed contro
  • Key featuresIt is designed for enthusiasts with need for controlling num

Style Molex LP4

  • Controls eight fans from one Molex connector
  • Three-speed switch sets 12 V, 7 V or off
  • Adhesive back mounts hub inside chassis
  • Compact 45 mm x 33 mm x 15 mm footprint
  • Works with both 3-pin and 4-pin fans

EN-Labs 8-Port 3-Pin Fan Hub

This internal power cable expands a single Molex 4-pin connector into eight 3-pin fan headers for system cooling. A three-position switch selects 12 V, 7 V or off for all attached fans simultaneously. The compact PCB measures 45 mm by 33 mm by 15 mm and includes an adhesive backing for chassis mounting. It supports a combined load of 12 V at 2 A across all ports.

Builders needing grouped speed control

The hub suits enthusiasts who want to manage up to eight fans from one manual switch without software or motherboard headers. It is not for systems that require per-fan PWM regulation, automatic temperature curves or individual speed profiles. Installations lacking a free Molex 4-pin power lead cannot use this device.

Molex 4-pin power input

The single LP4 connector draws supply directly from the power supply and limits total output to 12 V and 2 A. Every connected fan shares the same voltage level set by the High, Low or Off switch position. Verify that the combined current draw of your fans stays within this 2 A ceiling before ordering.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model name11-001-406D
Product type8 ports 3pin fan hub
Product colorBlack
Ports & slots
Connector count9

Other versions of this model

3 more in the same range

Questions about this item

What does the 12V/2A maximum output mean when the hub is installed?

The hub can supply up to 2 amps at 12 volts across all eight fan ports combined, so the total current draw of every connected fan must stay within that limit.

How does the Molex power connector limit what the hub can deliver?

Power comes from a single Molex 4-pin LP4 header on the power supply, so the hub cannot draw more current than that rail provides.

What physical space and mounting method does the hub need inside the case?

The board measures 45 mm by 33 mm by 15 mm with the adhesive pad, and the self-stick backing lets you fix it directly to the chassis.

More in Internal PSU & Riser Cables

Similar items