We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PCB with ten 4-pin fan headers and a SATA 15-pin power connector, 16-inch PWM cable attached

EN-Labs

EN-Labs PWMHUB10S 10 Port 4-Pin PWM Fan Hub SATA Splitter

SKU CH-XQJP-284FA

Expands one motherboard PWM header to ten fans with per-port capacitors and SATA power

  • Cable length2 ft (0.61 m)
  • First connectorSATA 15-pin
  • Second connector10 x PWM TX4 4pin male
  • Connector count12
  • Product typePWM 4pin fan hub splitter
  • Product colorBlack

Style 1 X SATA

  • Expands one motherboard PWM header to ten fans
  • Ten capacitances protect every fan output
  • SATA 15-pin power reduces motherboard load
  • Red header carries sole RPM signal to board
  • Self-stick mount simplifies case installation

Enthusiast PWM fan hub

The EN-Labs PWMHUB10S expands a single motherboard PWM header to support up to ten fans. It is designed for enthusiasts who need to control numerous system fans from one point. A SATA 15-pin connector draws 12 V power directly from the power supply, reducing load on the motherboard. The hub includes a 16-inch PWM cable for motherboard connection.

Ten outputs with per-port capacitance

Ten 4-pin PWM connectors each have a dedicated capacitance to protect connected devices. Four-pin fans run at synchronised speeds under PWM control, while three-pin fans operate at full speed. The red header carries the only RPM signal back to the motherboard, so a PWM fan should be connected there first. Without that signal the hub runs at full speed and PWM control is lost.

Passive cooling with adhesive mounting

The black PCB relies on case airflow for cooling and adds no fan noise of its own. Power draw is handled by the SATA connection, keeping motherboard thermals lower. A self-adhesive pad allows the hub to be secured in a convenient location. The 16-inch lead and 2-foot cable length give flexibility for routing in larger chassis.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model namePWMHUB10S
Product typePWM 4pin fan hub splitter
Product colorBlack
Ports & slots
First connectorSATA 15-pin
Second connector10 x PWM TX4 4pin male
Connector count12
Size & build
Overall length16 in / 40CM
Cable length2 ft (0.61 m)

Other versions of this model

3 more in the same range

Questions about this item

Will this hub let me run ten fans from a single motherboard PWM header on my older board?

Yes, the hub expands one motherboard PWM header to support up to ten fans, with ten capacitances protecting each output.

How can I confirm the hub is reporting fan speed correctly after I plug everything in?

Only the red-header channel passes an RPM signal to the motherboard, so the BIOS or monitoring software will show the speed of whichever PWM fan is connected to that port.

Does the package include the SATA power cable and mounting adhesive, or do I need to buy them separately?

The hub comes with a 16-inch PWM cable and a self-stick pad for mounting; the SATA 15-pin connector draws power directly from your PSU, so no extra power cable is required.

More in Heatsinks & Water Blocks

Similar items