We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short RGB splitter cables with 4-pin connectors and a gender changer adapter

EN-Labs

EN-Labs 12V 4-Pin RGB 3-Way Splitter Cable 1 ft 2 Pack

SKU CH-G1C6-RQXKF

Two 1-foot 12 V 4-pin RGB splitter cables divide one motherboard header into three channels with an included gender changer

  • Cable length1 ft (0.3 m)
  • Product typeRGB Cable
  • Overall length1 ft (0.3 m)
  • Key featuresExtend the rare RGB interface on your motherboard to four Al
  • Split one motherboard header into three RGB channels
  • 12 V 4-pin AURA RGB compatibility only
  • One-foot female-to-female cables for tidy routing
  • Male-to-male gender changer included for flexible connections
  • Two-pack value for multi-fan or strip setups

12 V 4-pin RGB splitter kit

This pair of cables turns a single motherboard 12 V 4-pin AURA header into three female ports so you can run three RGB fans or strips in sync. The included male-to-male gender changer lets you plug the splitter directly into the board without an extra adapter.

Capacity and headroom

The motherboard header typically supplies 12 V at 1 A for about 12 W total, so the three outputs share that budget. Runs longer than 3.3 ft or too many devices will cause dimming, signalling the header is overloaded.

Build and daily use

Female-to-female ends and the supplied gender changer give a secure, keyed connection when the arrow on each plug aligns with the 12 V mark on the board. The one-foot length keeps cable routing tidy inside compact cases. This kit does not support 5 V 3-pin addressable RGB systems.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model name12VRGBSPL1 × 3
Product typeRGB Cable
Size & build
Overall length1 ft (0.3 m)
Cable length1 ft (0.3 m)

Questions about this item

Will the 12V 4-pin AURA RGB splitter work with my older 5V 3-pin addressable RGB fans?

No, the splitter is designed for 12V 4-pin AURA RGB devices only and does not work with 5V 3-pin RGB systems.

How can I verify the 1 ft splitter cables are connected correctly after installation?

Ensure the arrow mark on each plug aligns with the 12V pin on the motherboard header and confirm all three connected channels light synchronously.

Does the 2-pack include the male-to-male gender changer adapters or must I buy them separately?

Each pack includes a 4-pin male-to-male gender changer pin, so no separate purchase is required for the adapter.

More in Internal PSU & Riser Cables

Similar items