We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 15 cm PWM 4-pin female to three male fan splitter cable

EN-Labs

EN-Labs 1X3PWM15CM 15 cm PWM 4-pin 1-to-3 fan power splitter cable

SKU CH-ZNRB-66E8F

Connects three PWM fans to one motherboard header for synchronised speed control over a 15 cm length

  • Cable length10 in (25.4 cm)
  • First connectorPWM TX4 4pin female
  • Second connector3 x PWM TX4 4pin male
  • Product typeFan power splitter cable
  • Product colorBlack
  • Overall length10 in / 25CM

Cable Length 6 in.

  • Connects three PWM fans to one motherboard header
  • 15 cm length keeps cable routing tidy inside the case
  • 26 AWG copper conductors deliver reliable power to each fan
  • Master connector passes RPM signal for software speed control
  • Two slave connectors omit RPM pin for synchronised fan speeds

PWM 1-to-3 fan splitter cable

This EN-Labs 1X3PWM15CM cable connects three PWM case fans to a single motherboard 4-pin header. It suits builders who need extra cooling channels without using additional headers. The 15 cm length keeps routing tidy inside compact cases. All three fans receive the same PWM speed signal from the board.

Master and slave connector layout

One branch carries a full 4-pin connector that reports RPM back to the motherboard. The other two branches omit the sense pin so those fans follow the master speed without individual feedback. This arrangement keeps all fans synchronised while avoiding signal conflicts. The 26 AWG copper conductors handle the combined current draw.

Three fans on one header

The splitter comfortably powers three typical case fans such as 120 mm or 140 mm models from common brands. It runs out of headroom when the total current exceeds what a single motherboard header can supply. Builders needing independent speed curves or more than three fans should use a powered fan hub instead.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model name1 × 3PWM15CM
Product typeFan power splitter cable
Product colorBlack
Ports & slots
First connectorPWM TX4 4pin female
Second connector3 x PWM TX4 4pin male
Size & build
Overall length10 in / 25CM
Cable length10 in (25.4 cm)

Other versions of this model

1 more in the same range

Questions about this item

Will the 26AWG copper conductors need replacement after extended use?

The 26AWG copper conductors are rated for continuous operation inside a PC case and do not have a scheduled replacement interval.

What is the combined current limit when three fans draw power through the single motherboard header?

The splitter passes the motherboard header's own current rating; total draw of all three fans must stay within that header's limit.

Does the 15 cm cable add noticeable heat or electrical noise when all three fans run at full PWM speed all day?

The short 26AWG cable adds negligible resistance and no active components, so heat and electrical noise remain minimal under continuous load.

More in Internal PSU & Riser Cables

Similar items