We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Y-cable splitting one 4-pin PWM fan header into three 4-pin male connectors, 10 inch length

EN-Labs

EN-Labs 1X3PWM25CM 10 inch Black Sleeved 4pin PWM 3-Fan Power Y Splitter Cable

SKU CH-VND3-ZVNNM

Connects three PWM fans to one motherboard header with a 25 cm black sleeved cable

  • Cable length10 in (25.4 cm)
  • First connectorPWM TX4 4pin female
  • Second connector3 x PWM TX4 4pin male
  • Product typeFan power splitter cable
  • Product colorBlack
  • Overall length10 in / 25CM

Cable Length 10 in.

  • Connect three fans to one motherboard header
  • 10 inch black sleeved cable keeps wiring tidy
  • PWM 4-pin female to three PWM 4-pin male connectors
  • All attached fans run at identical speed
  • Compatible with 3-pin and 4-pin fans from major brands

Three-fan PWM splitter for single headers

This EN-Labs 1X3PWM25CM cable connects three PWM case fans to one motherboard 4-pin header. The 10 inch black sleeved assembly carries a single female connector that splits into three male plugs. It is built for builders who want to add cooling without using extra fan headers.

Fits standard 4-pin fan headers and mixed 3-pin fans

The female end plugs into any motherboard PWM header while the three male ends accept both 4-pin and 3-pin fan connectors. Only one branch passes the RPM signal back to the board; the other two run at the same speed without reporting. This lets you expand airflow in tighter routing spaces.

Passive design draws power from the header

No external power connection is required because the splitter pulls supply and control current from the motherboard fan header. All three fans spin at identical PWM speeds set by the board firmware. The cable adds no active components, so thermal load and acoustic profile remain those of the attached fans alone.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 92% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model name1 × 3PWM25CM
Product typeFan power splitter cable
Product colorBlack
Ports & slots
First connectorPWM TX4 4pin female
Second connector3 x PWM TX4 4pin male
Size & build
Overall length10 in / 25CM
Cable length10 in (25.4 cm)

Other versions of this model

1 more in the same range

Questions about this item

What is the total current limit when three fans run from one motherboard 4-pin header?

The splitter draws power from a single PWM header, so the combined current of all three fans must stay within that header's rated limit.

Does the sleeved 10 inch cable add noticeable heat or noise during continuous operation?

The cable itself is passive and adds no active heat or noise; only the connected fans generate sound and warmth.

Which specific fan models are confirmed compatible with the three 4-pin male connectors?

Compatible fans include Corsair AF120 80mm, AF140, Cooler Master Blade Master 80, Master 92, Hyper 212 EVO 120mm, JetFlo 120mm, SickleFlow 120mm, MegaFlow 200mm, Noctua NF-F12, and Thermaltake WATER 3.0 Dual 240.

More in Internal PSU & Riser Cables

Similar items