EN-Labs 3PKSATAIII18BLA 3-pack SATA cable straight to 90° right-angle UV blue 18 inch locking latch
- 1.5 ft (0.46 m)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three 6-inch SATA 3.0 cables with 90-degree locking connectors in UV blue for internal drive connections
Color UV Blue
Style 1 Angle
This three-pack supplies straight-to-90-degree SATA III cables with locking latches. Each 6-inch lead connects a motherboard or host controller to an internal hard drive or DVD drive. The UV-blue colour aids cable identification inside the chassis.
Passive copper construction generates no heat and requires no active cooling. The cables draw no power themselves; attached drives must be powered separately. Secure locking latches maintain signal integrity without adding audible noise.
Rated for 6 Gbps transfer rates under the SATA 3.0 specification, actual throughput depends on the connected drive and controller. Backwards compatible with slower SATA revisions. Buyers needing longer reach or right-angle connectors on both ends should look elsewhere.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | 3PKSATAIII6BLA |
| Product type | SATA Data Cable |
| Product color | UV Blue |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Cable length | 6 in (15.2 cm) |
Other versions of this model
Align the straight end with the motherboard port and the 90-degree end with the drive, then press each locking latch until it clicks; the step often missed is not fully seating the latch so the cable can pull loose under vibration.
The cable itself requires no scheduled maintenance; replace it only if the locking latch breaks, the connector pins bend, or signal errors appear during sustained transfers.
The practical throughput limit is set by the attached drive or controller, not the cable, so sustained speed will plateau at the device's maximum rated transfer rate.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?