EN-Labs 3PKSATAIII6RDA 3-pack SATA cable straight to 90° right-angle UV Red 6 inch locking latch
- 1 x SATA to 1 x SATA
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three SATA III cables with locking latches, 6 inch length, UV red colour, supporting 6 Gbps data transfer
Color UV Red
Style Straight
A three-pack of straight SATA III data cables with locking latches, each 6 inch long and coloured UV Red. They connect motherboards or host controllers to internal Serial ATA hard drives and DVD drives for expanded storage. The cables carry data only and do not supply power to the attached drive.
Revision 3.0 supports up to 6 Gbps, twice the bandwidth of the previous revision, and remains backwards compatible with earlier SATA versions. Actual throughput is limited by the rating of the connected equipment, so sustained speeds will match the slowest device in the chain. The locking latch on each end keeps the connection secure during continuous operation.
Each cable measures 6 inch (15 cm) from connector to connector with a 180-degree straight orientation on both ends. This fixed length suits tight internal routing but cannot reach drives mounted farther from the motherboard. Buyers needing longer runs or right-angle connectors should look elsewhere.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | 3PKSATAIII6RD |
| Product type | SATA Data Cable |
| Product color | UV Red |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 2 |
Other versions of this model
The passive 15 cm data cable carries only signalling traffic, so it produces no audible noise and negligible heat even when the link runs at 6 Gbps all day.
You need a motherboard or host controller with a standard SATA port and a drive that also presents a standard SATA connector; the cables do not supply power, so a separate SATA power lead from the PSU is required for each drive.
Yes — the SATA 3.0 interface is backwards compatible, so the 180-degree straight connectors will link at the drive’s native 1.5 or 3 Gbps rate without any configuration.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?