We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 70 cm SATA III combo cable with 22-pin plug, 7-pin data and Molex 4-pin power connectors

EN-Labs

EN-Labs 70 cm SATA III 22-pin to 7-pin data + Molex 4-pin combo cable red

SKU CH-16NB-3NHSN

A 70 cm SATA III cable combines a 22-pin data-and-power connector with a 7-pin data plug and a Molex 4-pin power feed, supporting 6 Gbps bandwidth for 2.5" and 3.5" drives

  • Connector count3
  • Connector details1 x SATA to 1 x SATA
  • Connector genderMale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • Overall length26 in - 30 in
  • Powers SATA drives from a Molex 4-pin supply without a PSU upgrade
  • 70 cm length reaches drives in full-tower cases while supporting 6 Gbps SATA 3.0 bandwidth
  • Thin cable design reduces clutter and improves airflow inside the case
  • 22-pin SATA connector delivers both data and 12 V / 5 V power to 2.5" and 3.5" drives
  • Shielded copper conductors protect signal integrity for reliable transfers

What this cable does

This 70 cm combo cable carries SATA III 6 Gbps data and delivers 12 V and 5 V power to a SATA drive from a Molex 4-pin connector on the power supply. It lets you add a SATA device without upgrading the power supply. The 22-pin source plugs into a backplane or motherboard header, while the 7-pin data and Molex tails reach the drive.

Capacity and headroom

Rated for SATA 3.0 bandwidth, the link handles 3.5-inch and 2.5-inch hard drives or SSDs at full interface speed. The copper conductors and shielding keep the 6 Gbps signal clean over the 70 cm run. A single drive is supported; the cable does not split power or data to multiple devices.

When the upgrade makes sense

Use this cable when your power supply lacks native SATA power connectors but has a free Molex 4-pin lead. It replaces the need for a new power supply or a separate Molex-to-SATA adapter plus a data cable. The combination is not suited for builders who need to power more than one drive from a single Molex connection.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 85% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Ports & slots
Connector count3
Connector details1 x SATA to 1 x SATA
Connector genderMale to Female
Size & build
Overall length26 in - 30 in
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

Will the 22-pin SATA connector on this cable fit the combined data and power port on my older 2.5" laptop drive?

Yes, the 22-pin SATA connector carries both data and power for 2.5" drives that use the combined interface, while the separate 7-pin data and Molex 4-pin connectors attach to the motherboard and power supply.

How can I confirm the cable is delivering 6 Gbps bandwidth after installation?

Check the drive's reported link speed in the system BIOS or a tool like CrystalDiskInfo; it should show SATA 3.0 at 6 Gbps if the drive and port also support that rate.

Does the 70 cm cable include the Molex 4-pin power connector, or do I need a separate adapter?

The Molex 4-pin connector is integrated into the cable assembly, so no separate adapter is required to draw 12 V and 5 V power from the power supply.

More in SATA & eSATA Drive Cables

Similar items