We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex to four fan power splitter cable 10 inch

EN-Labs

EN-Labs LP424TX425CM Molex to 4-Pin Fan Power Splitter Cable 10 inch Black Sleeved 12V

SKU CH-GHV7-HZP35

Connects four 3-pin or 4-pin fans to a single Molex power connector with a 10 inch black-sleeved cable

  • Cable length10 in (25.4 cm)
  • First connectorMolex IDE 4pin
  • Second connector4 × 4pin fan male (2pin tips)
  • Connector count5
  • Product typeFan power splitter cable
  • Product colorBlack
  • Powers four fans from one Molex connector
  • Delivers 12 V DC power to each fan
  • Black sleeved cable resists abrasion inside the case
  • 10 inch length fits compact builds cleanly
  • Simple power-only adapter without PWM speed control

Molex-to-Fan Splitter for Four Devices

This EN-Labs cable splits one 4-pin Molex connector from a power supply into four 3-pin or 4-pin fan headers. It is built for PC builders who need to run multiple case or CPU cooler fans from a single PSU lead. The 10 inch length suits compact routing inside standard tower chassis.

Black Sleeved Cable with Male Pin Layout

The assembly uses a black sleeved jacket over a 25 cm run and terminates in five connectors total. Connector A is a 4-pin Molex IDE plug with two male pins; each of the four fan headers is a 4-pin housing fitted with two male tip pins. All connections are power-only, so fan speed reporting and PWM control signals are not passed through.

12 V Fixed Output with No Speed Control

The adapter delivers a constant 12 V DC supply to every attached fan, meaning connected fans will run at full voltage continuously. Because the cable lacks PWM or voltage regulation wires, motherboard fan curves and software speed profiles have no effect. Builders who require variable fan speeds should use motherboard headers or a dedicated fan controller instead.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model nameLP424TX425CM
Product typeFan power splitter cable
Product colorBlack
Ports & slots
First connectorMolex IDE 4pin
Second connector4 × 4pin fan male (2pin tips)
Connector count5
Size & build
Overall length10 in / 25CM
Cable length10 in (25.4 cm)

Questions about this item

Does the Molex-to-4-pin splitter deliver full 12 V to every fan port?

Yes, the cable provides 12 V DC output only, so each of the four fan connectors receives the same 12 V rail from the PSU Molex source.

How much clearance does the 25 cm sleeved cable need behind the motherboard tray?

The total length is 10 inch or 25 cm, so allow at least that much free space from the PSU Molex connector to the furthest fan header.

Why do the fan connectors have only two pins inside each 4-pin housing?

The splitter is a power-only adapter; the two pins carry 12 V and ground, so PWM speed control signals are not passed through.

More in Internal PSU & Riser Cables

Similar items