We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Y-cable with Molex plug splitting to two TX4 fan connectors

EN-Labs

EN-Labs MOLEXTX4-1X210IN Molex to 2x TX4 Fan Splitter Cable 10in Black

SKU CH-E5MC-9N7SC

Connects a Molex PSU output to two TX4 fans using a 10-inch black sleeved cable with 22 AWG copper conductors

  • Cable length10 in (25.4 cm)
  • First connectorMolex
  • Second connectorTX4
  • Connector count3
  • Product typeCable Splitters
  • Product colorBlack

Style PWM 1 x2

Cable Length 10' Braided

  • Power two fans from one Molex connector
  • 10 inch black-sleeved cable keeps routing tidy
  • 12 V supply direct from PSU Molex rail
  • 22 AWG 100 % copper cores carry reliable current
  • No PWM control — fans run at full 12 V speed

Molex to Dual TX4 Fan Splitter

This 10-inch cable converts a single Molex LP4 connector into two TX4 fan headers. It is intended for builders who need to run additional case fans from a power-supply Molex lead without using motherboard headers. The black sleeved jacket protects the 22AWG copper conductors inside. Power is drawn directly from the PSU 12V rail.

No PWM Speed Control

Only two pins on each TX4 connector are energised so the fans receive constant 12V power. There is no ability to throttle fan speed or use PWM control regardless of the header type. Fans will spin at full voltage for the duration of the session. The 100% copper core and UL 1007 22AWG wire gauge handle the sustained current without voltage drop.

Single Molex Source Limitation

The splitter draws all power from one Molex connector rated for 12V delivery. Builders who need independent speed curves per fan or motherboard-reported RPM cannot use this adapter. It suits setups where constant maximum airflow is acceptable and no fan-speed monitoring is required.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 95% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model nameMOLEXTX4-1 × 210IN
Product typeCable Splitters
Product colorBlack
Ports & slots
First connectorMolex
Second connectorTX4
Connector count3
Size & build
Overall length6 in - 10 in
Cable length10 in (25.4 cm)

Other versions of this model

5 more in the same range

Questions about this item

How much power does the Molex-to-TX4 splitter draw when two fans run continuously?

The cable passes 12 V from the PSU Molex connector; only two pins are energised on each TX4 header, so fans run at full speed without PWM control.

What power connector must the power supply provide for this splitter to work?

A standard Molex LP4 male connector from the PSU is required to supply 12 V to the two TX4 fan headers.

Will my older 3-pin fans run at variable speed when plugged into the TX4 headers?

No — only two pins carry power on each header, so 3-pin or 4-pin fans receive constant 12 V and cannot be throttled.

More in Internal PSU & Riser Cables

Similar items