We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex LP4 to four TX4 fan splitter cable, 10 inch length

EN-Labs

EN-Labs MOLEXTX4-1X110IN Molex LP4 to 4× TX4 fan splitter cable 10 in black

SKU CH-5JTA-GBM8H

Splits one Molex LP4 connector into four TX4 fan headers with a 10-inch black-sleeved cable using 22AWG copper wire

  • Cable length10 in (25.4 cm)
  • First connectorMolex LP4
  • Second connectorTX4
  • Connector count2
  • Product typeCable Splitters
  • Product colorBlack

Style Fan Adapter

Cable Length 10' Braided

  • Powers up to four fans from one Molex connector
  • 10-inch sleeved cable keeps builds tidy
  • 22 AWG copper cores deliver reliable 12 V supply
  • Simple LP4-to-TX4 layout needs no motherboard headers
  • Fixed two-pin feed runs fans at full speed

10-inch Molex to quad TX4 fan splitter

This 10-inch cable splits a single Molex LP4 connector from the power supply into four TX4 fan headers. It draws 12 V directly from the PSU through standard UL 1007 22 AWG copper conductors wrapped in a black sleeved jacket. Each of the four female connectors receives power on only two pins, so speed reporting and PWM control are not available. The adapter is intended for builders who want to run multiple case or cooler fans from one Molex lead.

Suits builders adding several fans without

The splitter suits anyone expanding case airflow when the motherboard lacks enough fan headers or when fan speed regulation is not required. It will not suit users who need per-fan PWM control, tachometer feedback or variable voltage regulation, because only the power and ground pins are energised on each output. Systems that rely on motherboard fan curves or software monitoring should look for a header-powered hub instead.

Fits between PSU Molex and up to four TX4 fans

Connect the male Molex LP4 plug to any free peripheral power cable from the PSU, then attach up to four 3-pin or 4-pin fans to the female TX4 sockets. The 10-inch length reaches nearby fan mounts in most mid-tower layouts while keeping cable routing tidy. Because the fans run at full 12 V continuously, the motherboard fan headers remain free for temperature-controlled devices such as CPU coolers.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model nameMOLEXTX4-1 × 110IN
Product typeCable Splitters
Product colorBlack
Ports & slots
First connectorMolex LP4
Second connectorTX4
Connector count2
Size & build
Overall length6 in - 10 in
Cable length10 in (25.4 cm)

Other versions of this model

5 more in the same range

Questions about this item

Does my power supply need a free Molex LP4 connector to run this splitter?

Yes, the cable draws 12 V power from a single Molex LP4 male plug on the PSU side.

If I connect three-pin fans to the four TX4 headers, will they still spin?

The four female headers accept both 3-pin and 4-pin fans, but only the two power pins are energised so every fan runs at full 12 V speed.

How can I confirm the cable is delivering power once installed?

All attached fans should start spinning immediately at full speed because the splitter provides constant 12 V with no PWM control.

More in Internal PSU & Riser Cables

Similar items