We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10-port PWM fan hub with SATA 15-pin power and 1.64ft cable

EN-Labs

EN-Labs PWMHUB10S50 10 Port PWM Fan Hub SATA 15-pin 1.64ft

SKU CH-FXEA-JQJ3B

Ten-port PWM fan hub splits one motherboard header into ten 4-pin connectors, powered by a SATA 15-pin plug with a 1.64ft RPM feedback cable

  • Cable length1.64 ft (0.5m)
  • First connectorSATA 15-pin
  • Second connector10 x PWM 4pin
  • Connector count12
  • Product typePWM 4pin fan hub splitter
  • Product colorBlack
  • Controls up to ten fans from one PWM signal
  • Red port returns RPM feedback to the motherboard
  • Works with both 3-pin and 4-pin fans
  • 64 ft cable reaches across most cases
  • SATA 15-pin power connector supplies 12 V to all ports

10-Port PWM Fan Hub

The EN-Labs PWMHUB10S50 expands a single motherboard fan header into ten 4-pin PWM connections. It draws power from a SATA 15-pin connector and includes a 1.64ft RPM feedback cable for monitoring one fan speed.

Red Port Speed Control

The red port passes the motherboard PWM signal to all ten fans so they spin at the same regulated speed. 3-pin fans connected to the hub run at full fixed speed because they lack PWM control.

Twelve Connectors Total

The hub provides ten fan outputs plus the SATA power input and the motherboard signal input. Adhesive backing and a central screw hole allow secure mounting inside the chassis where space permits.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model namePWMHUB10S50
Product typePWM 4pin fan hub splitter
Product colorBlack
Ports & slots
First connectorSATA 15-pin
Second connector10 x PWM 4pin
Connector count12
Size & build
Overall length1.64 ft / 50CM
Cable length1.64 ft (0.5m)

Questions about this item

How do I mount the hub inside my case?

The hub has EVA double-sided adhesive on the back for flat surfaces and a central screw hole on the PCB for mechanical fixing.

Which header do I plug the RPM feedback cable into and what happens if I use the wrong one?

Connect the 1.64ft RPM cable to the red CPU fan header on the motherboard; only that port sends a speed signal back to the board.

Will I need to replace the power cable or the hub itself over time?

The hub draws power from a SATA 15-pin connector; as long as the PSU cable remains intact no replacement is required.

More in Internal PSU & Riser Cables

Similar items