We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PMMA desktop switch panel with power and reset buttons, LED indicators, and 1.6 m flat cable

EN-Labs

EN-Labs PWSWPMMA5FT power switch cable 1.6 m

SKU CH-65Q2-VHGRE

A 1.6 m desktop power and reset switch with HDD and power LEDs in a PMMA case and adhesive base

  • Cable length5 ft / 1.6 meter
  • Product colorBlack
  • DetailsComb power button & reset button on Power supply and HDD wor
  • Key featuresDesktop PComputer power button: Making Power Computer much e

Cable Length 5 Feet

  • Combined power and reset buttons simplify desk control
  • 6 m cable reaches across awkward case placements
  • PMMA acrylic case shields switches from accidental knocks
  • Blue and red LEDs show power state and drive activity
  • Peel-off adhesive base lets you mount the unit anywhere

Desktop power-switch cable

This 1.6 m extension cable adds a desktop power button, a reset button and LED indicators for power-supply and hard-drive activity. It connects to the motherboard front-panel header and includes a PMMA cover that protects the switches. The adhesive backing allows mounting on any flat surface. It suits builders who want front-panel controls within easy reach.

Thermals noise and power

The cable carries only low-voltage signalling current, so it generates no measurable heat and requires no active cooling. No fan or moving part is present, making operation completely silent. Power draw is negligible and has no impact on the system power budget. The PMMA case remains at ambient temperature during normal use.

Motherboard front-panel compatibility

Five labelled connectors — POWER LED +, POWER LED -, HDD LED ±, POWER SW and RESET SW — plug directly into the standard F_PANEL header. Builders whose motherboards lack this header layout cannot use the switch. The cable length is fixed at 1.6 m and cannot be shortened or extended without re-termination.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 90% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model namePWSWPMMA5 ft
Product colorBlack
Size & build
Cable length5 ft / 1.6 meter

Other versions of this model

1 more in the same range

Questions about this item

How do I install the EN-Labs PWSWPMMA5FT switch on my desk using the self-adhesive base?

Peel the protective film from the bottom sticker, press the PMMA case firmly onto a clean, flat surface, then route the 1.6 m flat cable to the motherboard F_PANEL header and match the five labelled connectors: POWER LED +, POWER LED -, HDD LED ±, POWER SW and RESET SW.

What maintenance will the LED indicators and buttons need over time?

The blue power LED and red reset/HDD LED are sealed inside the acrylic case; no bulb replacement is required. Occasional dusting of the PMMA cover and checking that the adhesive base remains secure is all that is needed.

At what cable length does signal integrity become a concern for the front-panel headers?

The supplied 1.6 m flat cable is designed for standard motherboard F_PANEL pinouts; longer runs are not supported by this kit.

More in Internal PSU & Riser Cables

Similar items