We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 10-inch UV-red SATA cable with a 90-degree latch connector on one end and a straight 180-degree latch connector on the other

EN-Labs

EN-Labs SATA cable 10 inch 90° to 180° latch UV Red

SKU CH-9S3P-0Y4P1

A 10-inch SATA III cable with a 90° to 180° latch design supports 6.0 Gbps transfers using 26AWG tinned copper conductors

  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • Overall length6 in - 10 in
  • 90° connector fits tight drive bays easily
  • 10 inch length keeps cable routing neat
  • Latching 180° end secures connection firmly
  • 0 Gbps SATA III supports fast transfers
  • 26 AWG tinned copper with shielding ensures signal quality

10-inch SATA III cable with 90° to 180° latch

This 10-inch SATA III data cable uses a 90-degree connector on one end and a straight 180-degree connector on the other, both with locking latches. It is built with 26AWG tinned copper conductors and shielding to support 6.0 Gbps transfer rates. The UV red jacket aids cable identification inside a case. It suits anyone adding or replacing a SATA drive in a standard desktop or server chassis.

Builders routing cables in tight corners

The right-angle end fits against drive bays or motherboard headers where a straight plug would foul adjacent components, while the latched straight end secures the host connection. Technicians keeping a spare for troubleshooting will appreciate the backward compatibility with SATA I and II ports. Users whose drives and controllers are both in open space with ample clearance gain no advantage from the angled end and may prefer a simpler straight-to-straight cable.

Handles one SATA III drive at full 6.0 Gbps

The cable carries a single drive at the full SATA III 6.0 Gbps ceiling, limited only by the attached equipment. Its 10-inch length reaches between typical motherboard ports and mid-tower drive cages without slack. It does not extend to distant drive bays in full-tower cases, nor does it serve multi-drive arrays — each drive needs its own cable.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 85% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Design styleStraight
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length6 in - 10 in
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

Does this 90° to 180° SATA cable require any special motherboard headers or adapters to work?

It plugs straight into standard 7-pin SATA ports on the motherboard and drive; no extra headers or adapters are needed.

Will the 10-inch 90° connector fit beside a bulky graphics card that overhangs the lower SATA ports?

The 90° end sits low against the board, clearing most long cards, while the 180° end runs straight out from the drive.

How can I confirm the cable is running at the full 6.0 Gbps after I connect my SSD?

Check the negotiated link speed in BIOS or OS disk utilities; it should show 6 Gbps when both drive and port support SATA III.

More in SATA & eSATA Drive Cables

Similar items