EN-Labs 5 Pack 10" SATA III 6.0 Gbps Cable with Latch
- 0.8 ft (0.24 m)
- 1 x SATA to 1 x SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five 6-inch straight SATA cables with locking latches and 26 AWG tinned copper conductors for secure 6 Gbps drive connections
Color Black
This five-pack supplies 6-inch SATA III data cables with straight locking connectors. Each cable uses 26AWG tinned copper conductors and supports up to 6.0 Gbps transfer rates. The 180-degree latching design keeps connections secure inside compact cases. Builders expanding storage or technicians keeping spares will find the quantity practical.
Verify that your motherboard and drive SATA ports accept straight 180-degree connectors without blocking adjacent slots. The .5-foot length suits drives mounted close to the board but will not reach distant bays. Confirm your host controller and drive support SATA I, II or III signalling so the link negotiates correctly. Shielded construction helps in electrically noisy chassis.
These cables upgrade from older unlatched leads that can disconnect under vibration or tight routing. The jump is worth it when you need reliable detection during POST or hot-swap troubleshooting. They do not add speed beyond the 6.0 Gbps ceiling set by the SATA III spec. Buyers needing longer runs or right-angle plugs should look elsewhere.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Cable Kits |
| Product color | Black |
| Design style | 2 Port |
| Performance | |
| Rated speed | Test Value |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Cable length | 0.5 ft (0.15 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The package contains exactly five 6-inch straight SATA data cables with 180-degree latching connectors; no extra brackets, screws or adapters are supplied.
The 6-inch length suits cramped drive bays or stacked SSDs where slack would block airflow; longer cables are better when the drive sits farther from the motherboard port.
The cable supports the SATA III 6.0 Gb/s ceiling, so a modern SSD can run at its full interface speed; actual throughput still depends on the drive and controller.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?