We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

EN-Labs

EN-Labs SATA cable 90° to 180° latch 6" UV Red

SKU CH-429P-QFRYS

A 6-inch SATA III cable with a 90-degree to 180-degree latch design for secure drive connections in tight spaces

  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Cable length6 in (15.2 cm)
  • Product typeSATA III
  • Latching 90° connector secures drives in tight cases
  • 180° straight end fits standard motherboard ports cleanly
  • 6 Gbps SATA III throughput matches modern SSD speeds
  • 26 AWG tinned copper conductors resist signal loss
  • UL listed and RoHS compliant for safe builds

Cable geometry and data rate

This 6-inch SATA III cable carries one 90-degree connector and one straight 180-degree connector, each with a 7-pin latching receptacle. It supports the SATA 6 Gbps revision and remains compatible with earlier SATA I and II ports. Shielded 26 AWG tinned copper conductors handle the signal.

Builders with tight routing versus open layouts

The mixed-angle design helps route the cable behind drive cages or along motherboard edges where a straight plug would collide with other components. Builders who prefer a single straight run or need a longer reach for full-tower cases should consider a different length or angle combination.

Signal integrity under continuous transfer

The UL-listed, RoHS-compliant shielding and tinned copper conductors maintain the rated 6 Gbps link during sustained reads and writes without the signal degradation sometimes seen on unshielded ribbon cables. The locking latch prevents accidental disconnection when vibration or thermal expansion shifts the drive slightly.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 85% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Design style1 Angle
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length6 in - 10 in
Cable shieldingYes
Conductor typeCopper Conductor
Cable length6 in (15.2 cm)

Questions about this item

What must my motherboard provide for this 7-pin SATA cable to work?

Your motherboard needs a free 7-pin SATA data port; the cable plugs straight in with no extra power or adapter required.

Will the 90-degree to 180-degree latch cable work with my older SATA I and II drives?

Yes, the cable is backwards compatible with SATA I and II ports while still supporting up to 6.0 Gbps on SATA III devices.

How can I confirm the 26AWG copper cable is running at the expected 6.0 Gbps link speed?

Check the negotiated link rate in your BIOS or OS storage utility; it should report 6 Gbps when both drive and controller are SATA III.

More in SATA & eSATA Drive Cables

Similar items