We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver SATA cable with 90-degree and straight latching connectors, 24 inches long

EN-Labs

EN-Labs SATA III cable 90° to 180° 24" silver

SKU CH-CDQ6-JK3R7

A 24-inch SATA III cable with a 90-degree to 180-degree angled connector and locking latch supports 6.0 Gbps transfers

  • Cable length24 in (61 cm)
  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Connector genderFemale to Female
  • Conductor typeCopper Conductor
  • Product typeSATA III
  • 90-degree right-angle connector fits tight drive bays
  • 180-degree straight latch connector secures the link on motherboards
  • 24-inch length reaches across standard chassis layouts
  • 0 Gbps SATA III bandwidth supports modern SSDs and HDDs
  • 26 AWG tinned copper with shielding preserves signal integrity

SATA III cable with angled connectors

This EN-Labs SATA III cable measures 24 inches and uses a 90-degree connector on one end and a straight 180-degree connector on the other. Both ends are 7-pin female receptacles with an L-type key and a latch on the straight side. It is built with 26AWG tinned copper conductors, shielding and carries UL and RoHS markings.

Fits tight drive bays and motherboard headers

The right-angle plug lets you route the cable close to a drive chassis or backplane where a straight connector would hit the case wall. The latched straight end locks into the motherboard or host-controller port so vibration does not unseat it. Shielded construction keeps the signal clean inside a crowded enclosure.

Rated for 6.0 Gbps with legacy support

The cable supports the SATA III 6.0 Gbps ceiling and remains backwards compatible with SATA I and II ports. Actual throughput will not exceed the limit of the slowest connected device. It serves one drive per cable, so each additional SSD or HDD needs its own lead.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 85% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeSATA III
Design style1 Angle
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Connector genderFemale to Female
Size & build
Overall length21 in - 25 in
Cable length24 in (61 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Questions about this item

What is the maximum data rate this 24-inch SATA III cable can sustain under continuous use?

The cable supports SATA revision III up to 6.0 Gbps, though actual throughput is limited by the connected drive and host controller.

Does the 26AWG tinned copper construction or shielding affect heat or noise during all-day operation?

Passive copper cables generate no noise and negligible heat; the foil shielding protects signal integrity without adding thermal load.

Which connectors must already be present on the motherboard and drive for this 90-degree to 180-degree cable to fit?

Both ends require standard 7-pin SATA ports; the 90-degree plug suits tight drive bays while the straight 180-degree end has a latch for the motherboard.

More in SATA & eSATA Drive Cables

Similar items