STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6-inch SATA III data cable with a 90-degree to 180-degree angled connector and latch for secure drive connections in tight spaces
The EN-Labs SATA6UVBL90 is a 6-inch SATA III data cable with a 90-degree connector on one end and a straight 180-degree connector on the other. It links SSDs or hard drives to motherboards and host controllers in cramped cases. The short length reduces clutter and improves airflow. The UV-blue jacket adds visibility during installation.
Each end uses a 7-pin SATA receptacle with an "L" type key. The straight connector includes a latch that locks into the port, preventing accidental disconnection when cables are routed near other components. Shielded 26 AWG tinned copper conductors carry signals up to 6.0 Gbps. The cable meets UL listing and RoHS compliance standards.
This cable upgrades installations where a straight connector blocks adjacent ports or presses against a drive cage. The right-angle end fits flush against the drive, while the latched straight end stays seated on the motherboard. It is not suited for external eSATA enclosures or runs longer than the supplied 6 inches. Builders needing extended reach should select a longer cable.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA6UVBL90 |
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
| Cable length | 6 in (15.2 cm) |
The cable supports up to 6.0 Gbps, but real-world throughput is limited by the drive and controller you connect.
One end is a right-angle 7-pin plug; the other is straight with a latch. Both use the standard L-type key.
Align the straight connector, push straight in until the metal latch clicks, then route the 6-inch cable to the angled end.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?