We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.1 Type A male to SATA 22-pin adapter cable 60cm

EN-Labs

EN-Labs USB 3.1 Type A to SATA 22-pin Adapter Cable 60cm

SKU CH-JNW0-6MEWT

Connects a 2.5" SATA SSD or HDD to a USB 3.1 Type A port at up to 10 Gbps with UASP support, powered by the USB bus and including a 12 V input for 3.5" drives

  • First connectorUSB 3.1 Type A
  • Second connectorSATA 22pin
  • Product typeUSB to SATA
  • DetailsType: USB 3.1 Type A to SATA III 6Gpbs Adapter,with UASP sup
  • Key featuresConnect a 2.5 in SATA SSD/HDD to your computer using this US
  • In the boxUSB to SATA Adapter, Black White Color USB A Male to Male Ca
  • Connect 2.5" SATA drives via USB 3.1 Gen 2 10Gbps
  • UASP support accelerates transfers with ASMT1351 chipset
  • Bus-powered for 2.5" SSDs and HDDs, no external supply needed
  • 60cm cable length fits desktop and laptop setups
  • Backward compatible with USB 3.0, 2.0 and 1.0 hosts

USB 3.1 to SATA adapter for 2.5" drives

The EN-Labs adapter cable connects a 2.5 inch SATA solid-state or hard drive to a USB 3.1 Type A port using the ASMT1351 chipset. Power is drawn from the USB 5 V bus, so no external supply is needed for 2.5 inch units. The cable length is 60 cm and the connector on the drive side is a 22 pin SATA interface.

Suits users adding a single 2.5" SATA drive via USB

This adapter is intended for laptop owners or desktop users who want quick external access to one 2.5 inch SATA SSD or HDD. UASP support enables faster transfers when the host controller also supports the protocol. Builders who need to power a 3.5 inch drive must supply their own 12 V 2 A adapter, which is not included.

Key specification: SATA 22 pin connector

The decisive detail is the 22 pin SATA connector paired with USB 3.1 Gen 2 10 Gbps signalling, which only fits 2.5 inch SATA drives directly. If your drive uses a different interface or you require power for a 3.5 inch unit without a separate adapter, this cable will not work.

How it compares

Measured against everything we stock in USB Adapter Cables & Dongles, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 63% of the 1,430 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeUSB to SATA
Ports & slots
First connectorUSB 3.1 Type A
Second connectorSATA 22pin
In the box
In the boxUSB to SATA Adapter, Black
White Color USB A Male to Male Cable,60 cm / 2 ft

Questions about this item

What type of drive do I need to own for the 22-pin connector to fit without an extra power supply?

A 2.5-inch SATA SSD or HDD draws power from the USB 5 V bus, so no 12 V adapter is required.

Will my SATA I 1.5 Gbps drive work at its native speed when connected through this adapter?

Yes, the adapter is backward compatible with SATA I 1.5 Gbps and SATA II 3 Gbps drives, so the drive will operate at its rated speed.

How can I verify the ASMT1351 chipset is using UASP after I plug the drive in?

In Windows Device Manager check the driver name — it should list "USB Attached SCSI (UASP)" instead of the older USB Mass Storage driver.

More in USB Adapter Cables & Dongles

Similar items