Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 2m Aqua Blue
A 2-metre OM3 multimode patch cord with LC duplex connectors, 3.0 mm jacket and 850 nm wavelength rated for 10/40 GbE links
- Supports 10G speeds with OM3 10-gigabit core
- Low typical insertion loss of .2dB preserves signal strength
- Maximum insertion loss limited to .3dB for reliable links
- High return loss above 38dB reduces reflected light
- 0mm PVC jacket protects fibre in data-centre racks
Enfain OM3 Duplex Patch Cable
This Enfain OM3 duplex patch cable carries 10 gigabit multimode signals between LC ports. It suits installers wiring switches, servers or patch panels in a data-centre rack. The two metre aqua blue jacket makes the run easy to identify among other fibres.
3.0 mm PVC jacket with ceramic ferrules
A 3.0 mm PVC jacket protects the fibres while staying flexible enough for dense cable trays. Ceramic ferrules on each LC connector keep end faces aligned and resist wear over repeated mating. The cable tolerates a 330 mm bend radius and an operating range of minus 20 °C to plus 60 °C.
0.2 dB typical insertion loss
Typical insertion loss sits at 0.2 dB with a maximum of 0.3 dB, while return loss exceeds 38 dB at 850 nm. These figures confirm the link budget for 10 gigabit Ethernet over the rated distance. Buyers needing singlemode reach or higher bandwidth grades should select a different cable type.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 83% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What bandwidth does the OM3 multimode duplex LC-LC interface support in practice?
The OM3 10-gigabit core supports 1G, 10G and 40G links at 850 nm wavelength with typical insertion loss of .2 dB and maximum .3 dB, and return loss above 38 dB.
What physical space and bend allowance does the 2 m cable need?
The cable has a 3.0 mm PVC jacket and requires a minimum bend radius of 330 mm, so allow that clearance behind the patch panel or switch.
How do I install the ceramic-ferrule LC connectors without damaging them?
Align the keyed LC duplex clips, push straight in until they click, and never twist the ferrules — twisting is the step most people get wrong and can exceed the 1000-cycle rating.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Cable Leader 10m OM1 SC to SC Duplex 62.5/125 Corning OFNR Orange fibre optic cable
- Orange
- 31–50 ft
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Cable Leader OM1 ST-ST Duplex 62.5/125µm 10m Orange OFNR Corning FB103-5410
- Orange
- 31–50 ft
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
Cable Leader 10m OM2 LC to SC Fibre Optic Cable Duplex 50/125 Orange OFNR
- Orange
- 31–50 ft










