Enfain OM3 LC-LC Duplex Multimode Fiber Patch Cable Aqua Blue 20m
A 20 m OM3 duplex multimode patch cable with LC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and 1000 mating cycles
- Supports 10G 40G networks with OM3 10-gigabit core
- Low 0.2dB typical insertion loss keeps signal strong
- High return loss above 38dB reduces reflection errors
- 0mm PVC jacket protects fiber during routing
- Rated for 1000 mating cycles for long-term reliability
20-metre OM3 duplex patch cable
This aqua-blue multimode fibre patch cable uses OM3 10-gigabit core glass and LC duplex connectors. It is built for 10 GbE links between switches, servers or patch panels in data-centre and campus networks. The 3.0 mm PVC jacket meets standard indoor routing requirements.
Capacity and headroom
The cable supports 1 GbE, 10 GbE and 40 GbE transmission at 850 nm wavelength. Typical insertion loss is .2 dB with a maximum of .3 dB, while return loss exceeds 38 dB. These figures provide margin for short-reach links up to the OM3 distance limits defined by the relevant standards.
850 nm wavelength and OM3 core
The 850 nm VCSEL window and OM3 core diameter determine compatibility with existing transceivers. Installers needing single-mode reach, different connector polish, or jacket ratings not listed here should select an alternative cable type.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $29.99
- Typical for this category: the median of 812 items is $29.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Will the 20 m OM3 LC duplex cable work with my existing 1 Gb and 10 Gb switches?
Yes, the OM3 core is rated for 1 Gb, 10 Gb and 40 Gb links at 850 nm, so it will operate with your current switches.
How can I verify the link is performing correctly after installation?
Check that insertion loss stays at or below 0.3 dB and return loss exceeds 38 dB; those figures confirm the patch cord meets its spec.
What comes in the box and is anything else needed to connect two LC ports?
The package contains the 20 m aqua duplex cable with LC connectors on both ends; no extra parts are required for a direct LC-to-LC connection.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Belkin F2F402LL-03M-G 10 ft LC/LC Duplex Multimode Fibre Optic Cable 50/125 Aqua
- Others
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
HP 800W Flex Slot Titanium Hot Plug Power Supply Kit 720482-B21
- Power Supply
- Hot Pluggable
Ergotron 97-563-062 Cable Management Kit Black 0.5 ft
- Cable Management Kit
- Black
AddOn 50/125 OM4 LC/SC duplex aqua fibre optic cable 16.40 ft
- 2 x LC Male Network
- Network Cable










