Enfain OM3 LC-LC Duplex Multimode Fibre Optic Cable 8m Aqua Blue
An 8 m aqua duplex patch cord with OM3 multimode fibre, LC connectors on both ends, 3.0 mm PVC jacket and ceramic ferrules for 10 Gbit links at 850 nm
- OM3 core supports 10 Gbps links
- Typical insertion loss .2 dB preserves signal strength
- Return loss exceeds 38 dB cuts reflections
- Ceramic ferrules rated for 1000 mating cycles
- 0 mm PVC jacket bends to 330 mm radius
8-metre OM3 duplex fibre patch cord
This eight-metre duplex patch cord uses OM3 multimode fibre with LC connectors on both ends. It is built for 10-gigabit Ethernet links between switches, servers or storage arrays in data-centre or enterprise racks. The aqua jacket identifies the OM3 grade at a glance.
Typical insertion loss of 0.2 dB
The cable meets a typical insertion loss of 0.2 dB and a maximum of 0.3 dB, while return loss exceeds 38 dB. A 3.0 mm PVC jacket protects the fibres during routing, and the assembly is rated for 1000 mating cycles. Operating temperature spans -20 °C to +60 °C.
850 nm wavelength for 10 GbE over OM3
The 850 nm transmission window matches OM3 fibre specifications for 10-gigabit multimode links. Buyers needing single-mode reach, higher bandwidth grades such as OM4 or OM5, or connector types other than LC will need a different cable.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 64% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
How do I install the LC duplex connectors on this OM3 cable and what step is often missed?
Push each LC connector straight into the port until the latch clicks; the step often missed is removing the protective dust caps from both ferrule tips before insertion.
What maintenance or replacement will this 8 m OM3 patch cord need over time?
The ceramic ferrules are rated for 1000 insertion and removal cycles; plan to replace the cable once that mating limit is reached or if return loss drops below 38 dB.
What is the first limit that appears when this cable runs at 10 Gbps continuously?
At 850 nm wavelength the typical insertion loss is 0.2 dB and the maximum is 0.3 dB, so accumulated attenuation becomes the first sustained-use constraint.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Tripp Lite N820-02M-OM4 6 ft duplex OM4 fibre optic cable
- Others
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Nippon Labs 30FP-16FP-M4-LCLC-04 fibre optic cable OM4 LC/LC 4m
- Fiber
- Blue
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
Tripp Lite N316-10M 10 m duplex 62.5/125 µm multimode fibre optic cable
- Others
- See Product Details










