Enfain OM3 SC-ST Duplex Multimode Fibre Optic Cable 10m Aqua Blue
OM3 multimode duplex patch cable with SC and ST connectors, 10-metre aqua jacket, 3.0 mm diameter, 850 nm wavelength, .2 dB typical insertion loss, >38 dB return loss, rated for 1 Gb.
- Low signal loss with 0.2 dB typical insertion loss
- High return loss exceeding 38 dB for clean signals
- Supports 10 Gbps over OM3 multimode fibre
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Wide operating range from -20 °C to +60 °C
What this cable is and who needs it
This Enfain OM3 multimode fibre patch cord connects equipment with SC and ST connectors over ten metres. The aqua blue 3.0 mm PVC jacket protects duplex fibres rated for 1 Gbps, 10 Gbps and 40 Gbps links in switches, servers and data-centre racks.
Who it suits and who should look elsewhere
Installers who need SC-to-ST duplex links at 850 nm wavelength with insertion loss of 0.2 dB typical and 0.3 dB maximum will find the spec met. Buyers requiring single-mode fibre, LC or MTP connectors, longer reach or higher bandwidth than OM3 provides should choose a different cable type.
The spec that decides fit
The OM3 10-gigabit core operating at 850 nm with ceramic ferrules and a 330 mm bending radius determines whether this patch cord matches the link budget and physical routing of your installation.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $26.99
- Cheaper than about 54% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What does the OM3 10-gigabit core mean for actual link speeds?
The OM3 core supports 1 Gb/s, 10 Gb/s and 40 Gb/s multimode links at 850 nm wavelength.
How do the SC and ST connectors limit the cable's practical use?
One end uses an SC duplex connector and the other an ST duplex connector, so it only fits ports with those exact interfaces.
What physical space is needed to route the 3.0 mm jacket without exceeding the bend limit?
The cable requires a minimum bend radius of 330 mm and an operating temperature range of -20 °C to +60 °C.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Black Box FOSM-002M-SCLC fibre optic cable 6.56 ft SC to LC
- Fiber Optic Patch C…
- Yellow
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Tripp Lite 10Gb Duplex Multimode 50/125 OM3 OFNP Fibre Optic Cable LC/LC 2 m
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange










