STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts one HDMI input to two SDI outputs with auto format detection up to 1080p at 60 Hz and cable runs of 200 m
The ESTONE converter takes a single HDMI Type A input and splits it to two SDI outputs for camera, CCTV or broadcast workflows. It handles HDMI 1.3 signals at 480i, 576i, 720p and 1080i/p across 24, 25, 30, 50 and 60 Hz. The unit is not bi-directional and cannot convert SDI back to HDMI. A power adapter is included in the box.
The compact converter runs from the supplied external power adapter with no fan or active cooling. Passive operation keeps noise at zero during continuous use. Typical draw is low enough for standard wall power and does not require a dedicated circuit. Extended cable runs up to 100 metres at 3G-SDI and 200 metres at HD-SDI add no thermal load to the device itself.
A metal enclosure shields the conversion circuitry from EMI in studio or field environments. One HDMI port and two BNC SDI ports provide a straightforward daisy-chain or dual-monitor setup without extra splitters. Auto-detection selects HD-SDI or 3G-SDI format to match the incoming signal. The package includes the converter, power adapter and user manual only.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI to SDI Converter |
| Ports & slots | |
| First connector | 1 x HDMI input |
| Second connector | 2 x SDI output |
| In the box | |
| In the box | 1 x HDMI to SDI Converter 1 x Power Adapter 1 x Uuse Manual |
Connect the HDMI source to the single Type A input, attach the supplied power adapter, then run two SDI cables from the dual outputs; the common mistake is trying to feed an SDI signal back into the HDMI port, which this one-way converter does not support.
The unit has no user-serviceable parts; only the external power adapter may need replacement if it fails, otherwise the converter itself requires no periodic maintenance.
The 3G-SDI outputs are rated for a maximum of 100 metres at 1080P 60 Hz, so cable length beyond that distance becomes the first practical limit under sustained use.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?