ESTONE OZF8K2 1x3 HDMI 2.1 Splitter 8K 60Hz

1x3 HDMI 2.1 Splitter for Multi-Display Mirroring

The ESTONE OZF8K2 duplicates a single HDMI source across three displays simultaneously. It supports resolutions up to 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz with HDR10+ and Dolby Vision pass-through. The unit handles 48 Gbps bandwidth and HDCP 2.3 compliance for protected content. It is designed for home cinema, gaming consoles and professional signage where identical mirrored output is required.

Verify Source Output and Cable Lengths Before Buying

Confirm your source device outputs an HDMI 2.1 signal at the desired resolution and refresh rate. The splitter accepts input cables up to 16 ft and drives output cables up to 10 ft each, with a total signal path of 26 ft. Ensure all three displays support the target resolution and HDCP version; the EDID management negotiates a common format across outputs. A DC 5 V power adapter is included and must be connected for operation.

Passive Cooling With No Fan Noise

The aluminium enclosure dissipates heat without a fan, so the device runs silently in normal use. Power draw is limited to the supplied 5 V adapter, adding minimal load to a power strip. The compact 5.59 x 3.15 x 1.26 inch chassis fits behind equipment racks or display mounts without blocking adjacent ports. No software or drivers are required; the splitter is operational immediately after power and cables are connected.