STARTECH HDMI-SPLITTER-4K60UP 2-Port 4K 60Hz Video Splitter
- HDMI Splitters
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one DisplayPort 1.4 signal into two 4K outputs at up to 144 Hz with audio extraction and MST extend mode
The ESTONE OZFD takes a single DisplayPort 1.4 output and drives two DisplayPort displays at once. It suits professionals and gamers who need mirrored or extended desktops from one GPU port. A USB-C power cable and 5V/2A adapter are included to power the internal chip. The compact 74 x 74 x 14 mm black enclosure weighs 35 g.
The splitter operates within the 32.4 Gbps bandwidth of the DisplayPort 1.4 standard. In MST extend mode the link tops out at 3840 x 2160 at 120 Hz, while mirror mode reaches 3840 x 2160 at 144 Hz on a single active output. Both connected monitors and the source GPU must support DisplayPort 1.4 and DSC to hit the highest figures. A 10 metre DisplayPort cable is the stated usage example.
One monitor can run 3840 x 2160 at 144 Hz when the other is idle or mirroring. With both screens active in extend mode the practical ceiling is 3840 x 2160 at 120 Hz on one and 60 Hz on the other. Pushing beyond these refresh rates or adding a third display is not supported. Buyers needing higher refresh rates or more than two outputs will need a different solution.
Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Product line | OZFD |
| Model name | OZFD |
| Part number | OZFD |
| Product type | DisplayPort Splitters |
| Adapter type | Display Extenders |
| Product color | Black |
| Performance | |
| Bandwidth rating | 32.4 Gbit/s |
| Display | |
| Maximum supported resolutions | 3840 × 2160 |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| Port count | 2 |
| Input ports | 1x DisplayPort female |
| Output ports | 2x DisplayPort female |
| Size & build | |
| Product dimensions | 5.31 × 3.11 × 0.87 in |
| Product weight | 2.12 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1* DisplayPort Splitter, 1x Power Adapter, 1* USB to Type-C Power cable (5 V/2A), 1*User Manual. |
Use mirror mode (A-A-A) when both screens must show the same 4K@144Hz image; use extend mode (MST) for independent desktops, which runs at 4K@120Hz on one output and 4K@60Hz on the other.
A single active port delivers 3840×2160 at 144 Hz; with both ports active in extend mode the splitter drops to 4K@120Hz on one screen and 4K@60Hz on the other.
The 32.4 Gbps bandwidth caps dual-stream operation at 4K@120Hz + 4K@60Hz, while a single stream can reach 4K@144Hz if the source, cable and monitors all support DSC.
More in HDMI & Video Splitters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?